1-6CHAPTER 1 E-Series Overview
Fan tray
I/O module
SRP I/O module
Power input module
Cable management bracket
Plenum
Figure 1-5ERX-14xx model, rear view
ERX-7xx Models
Note: In the E-series documentation, the term ERX-7xx models refers to both the ERX-705 router and the ERX-710 router. The terms ERX-705 router and ERX-710 router refer to the specific models. See Figure 1-6and Figure 1-7.
The ERX-7xx models are robust, high-density routers with less capacity than the ERX-14xx models. The ERX-7xx models use either the SRP-10G module or the SRP-5G module.
You can configure the ERX-7xx models to enable the line modules to operate either at full line rate performance or at a rate dependent on the resources available. For information about configuring performance of line modules, see E-Series System Basics Configuration Guide, Chapter 5, Managing Line Modules and SRP Modules.
Note: The 10-Gbps SRP module used in the ERX-310 router is different from the 10-Gbps SRP module used in the ERX-710 router. See section SRP Module, later in this chapter, for more information.
