Juniper Networks E-Series manual 12-22CHAPTER 12 Module Specifications

Table 12-3I/O module specifications (continued)
		Model	SRP Module	No. of
I/O Module Labela	Type	Compatibility	Compatibility	Ports	Connector Type	Cabling Specifications
FE
FE-2	Non-ASIC	ERX-7xx models	SRP-5G	2	RJ-45	• For 10-Mbps operation, use CAT
I/O		ERX-1410 router	SRP-5G+			3, 4, or 5 UTP cable.
						• For 100-Mbps operation, use only
			SRP-10G
						CAT 5 UTP cable.
						• The transmitted signal complies
						with IEEE 802.3/802.3u for cable
						lengths up to 100 m
						(328 feet).
FE-8	ASIC	ERX-7xx models	SRP-5G+	8	RJ-45	• For 10-Mbps operation, use CAT
I/O		ERX-14xx models	SRP-10G			3, 4, or 5 UTP cable.
						• For 100-Mbps operation, use only
		ERX-310 router	SRP-40G
						CAT 5 UTP cable.
			SRP-40G+

	SRP-SE10G	• The transmitted signal complies
		with IEEE 802.3/802.3u for cable
		lengths up to 100 m
		(328 feet).
GE

12-22CHAPTER 12 Module Specifications

GE	ASIC	ERX-7xx models	SRP-5G+
I/O		ERX-14xx models	SRP-10G
SFPb,c
		ERX-310 router	SRP-40G
			SRP-40G+
			SRP-SE10G

1 active	LC full duplex
1 redundant

•Tx power:

›min: –9.5 dBm

›max: –4 dBm

•Center wavelength: 850 nm

•Rx input power:

›min: –17 dBm

›max: –3 dBm

•Rated for 275 m (300 yards) over 62.5-micron core cable

•Rated for 550 m (601 yards) over 50-micron core cable