Delta 31-390, 31-392 Operating Controls and Adjustments, Starting and Stopping Edge Sander

Page 10

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND STOPPING EDGE SANDER

To start the tool, push the start button (A) Fig. 25; to stop the tool, push stop button (B).

ADJUSTING TABLE POSITION

To raise or lower the straight table, loosen lock knobs (A) Fig. 26, adjust table height and tighten knobs (A). NOTE: When straight sanding, it is advisable to raise one end of the table so it is higher than the other, as shown. This allows for cooler belt running and less material burning. It also prolongs belt life, provides effici- ent sanding and will prevent spot wear on the belt surface. CAUTION:

MAKE CERTAIN THE SANDING BELT IS NOT IN CONTACT WITH THE TABLE BEFORE STARTING THE MACHINE.

ADJUSTING TILTING TABLE

The tilting table (A) Fig. 27, can be tilted by loosening two lock knobs (B) on each side of the table. Once the angle of tilt has been set, tighten lock knobs (B).

The tilting table allows for bevel sanding operations to be performed and reduces the amount of friction on the sanding belt when edge sanding certain shapes.

CAUTION: AFTER SETTING THE ANGLE OF TILT ON THE TABLE, MAKE CERTAIN THE SANDING BELT IS NOT IN CONTACT WITH THE TABLE. If the table is in contact with the sanding belt, the shorter straight platen

(C) must be adjusted.

A

B

Fig. 25

A

Fig. 26

AC

B

B

Fig. 27

ADJUSTING SHORT PLATEN

To adjust the short platen when sanding on the tilting table, proceed as follows:

1.DISCONNECT TOOL FROM THE POWER SOURCE.

2.Remove the top guard and dust chute assembly.

3.Turn studs (A) Fig. 28, counterclockwise to loosen platen (B).

4.Adjust platen (B) Fig. 28, until the sanding belt is close to, but not contacting tilting table (C). Tighten studs (A) Fig. 28, after adjustments are made.

5.Reassemble top guard and dust chute assembly to edge sander.

C

A

B

Fig. 28

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Edge Sander General Safety Rules Refer to them often Use them to instruct others Power Connections Unpacking and Cleaning Extension CordsAssembly Assembling Legs to Edge SanderAssembling Belt Tension Lever Disconnect Tool from Power Source Assembling Auxiliary END Table Assembly Disconnect Tool from Power SourceAdjusting Tilting Table Operating Controls and AdjustmentsAdjusting Table Position Adjusting Short PlatenAdjusting Long Platen Adjusting Auxiliary END TableAdjusting Belt Tracking Adjusting Pulley AlignmentContour Sanding around the Drive Pulley OperationsEdge Sanding Contour Sanding around the Auxiliary Abrasive Drum SpindleChanging Abrasive Sleeves MaintenanceChanging Sanding Belts Changing Graphite PadsImportant Disconnect Tool from Power Source Changing Drum SpindlesCanadian PORTER-CABLE Delta Service Centers

31-392, 31-390 specifications

Delta 31-390 and 31-392 are advanced aircraft models that stand out in the aviation industry for their unique features and cutting-edge technologies. Designed with a focus on efficiency, safety, and comfort, these aircraft are ideal for a variety of aviation applications, including commercial transport, cargo delivery, and specialized missions.

One of the main features of Delta 31-390 and 31-392 is their aerodynamic design, which significantly enhances fuel efficiency. The sleek fuselage, combined with advanced wing configurations, reduces drag while improving lift. This results in lower fuel consumption, making these aircraft environmentally friendly while also reducing operating costs for airlines and operators.

The powerplants on these models are among the most advanced in the aviation sector. Equipped with high-performance turbofan engines, the Delta 31-390 and 31-392 deliver impressive thrust capabilities while maintaining lower noise levels during flight. The engines incorporate the latest noise reduction technologies, ensuring compliance with stringent noise regulations, making them suitable for operations in noise-sensitive areas.

Safety features are paramount in the design of the Delta 31-390 and 31-392. The aircraft are fitted with state-of-the-art avionics systems that provide pilots with real-time data and advanced navigation capabilities. The inclusion of fly-by-wire technology enhances control and stability during various flight conditions. Additionally, the aircraft's multi-layered safety systems, including redundant systems for critical functions, ensure a high level of operational safety and reliability.

Comfort is another significant aspect of these aircraft. The interior of the Delta 31-390 and 31-392 boasts spacious cabins designed with passenger comfort in mind. Ample legroom, ergonomic seating, and modern amenities contribute to an enjoyable flying experience. The incorporation of advanced climate control systems further enhances passenger comfort by maintaining optimal cabin conditions throughout the flight.

Both models are also equipped with advanced communication systems, ensuring that pilots can stay connected with air traffic control and ground support at all times. The aircraft's ability to integrate with emerging technologies, such as satellite communications, positions them for future advancements in aviation infrastructure.

In summary, Delta 31-390 and 31-392 are exemplary aircraft that combine efficiency, safety, and comfort. Their innovative technologies, including advanced aerodynamics, powerful turbofan engines, and sophisticated avionics, make them stand out in the competitive aviation market. As the industry continues to evolve, these models are well poise to meet the demands of modern aviation.
Top Page Image Contents