Delta 31-392, 31-390 Assembling Auxiliary END Table Assembly, Disconnect Tool from Power Source

Page 9

ASSEMBLING AUXILIARY END TABLE ASSEMBLY

The auxiliary end table is furnished as standard equip- ment with the edge sander. The table is used when performing contour sanding operations around the drive pulley and auxiliary abrasive drum and spindle assembly.

To assemble the auxiliary end table proceed as follows:

1.DISCONNECT TOOL FROM POWER SOURCE.

2.Align the two holes (A) Fig. 17 in end table support bracket (B) with two holes (C) in the side of the edge sander and fasten with two 3/8-16 x 1-1/4" long hex head screws (D) Fig. 18, flatwashers, lockwashers, and hex nuts. Assemble flatwashers on bolts. Insert bolts through holes. Assemble lockwashers and hex nuts and tighten securely.NOTE: The top guard and dust chute assembly has been removed for clarity.

3.Turn the auxiliary end table (D) Fig. 19, face down on a supporting surface and slide table support column assembly (E) into channels of plate (F) on the underside of table (D) as shown.

4.Tighten lock screw (G) Fig. 20, to fasten table (D) to table support column assembly (E). NOTE: Adjustments to table can be made later.

5.Insert end table assembly (H) Fig. 21, into bracket (B) which was assembled in STEP 2. Tighten lock knob (J) Fig. 22, to hold end table assembly (H) in position in bracket (B).

6.Reassemble top guard and dust chute assembly to machine.

7.Refer to section "Adjusting Auxiliary End Table" for proper end table positions and adjustments.

H

 

B

J

 

Fig. 22

A C

Fig. 17

D

Fig. 18

FE

D

Fig. 19

EG

D

Fig. 20

H

B

Fig. 21

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Edge Sander General Safety Rules Refer to them often Use them to instruct others Power Connections Extension Cords Unpacking and CleaningAssembling Legs to Edge Sander AssemblyAssembling Belt Tension Lever Disconnect Tool from Power Source Disconnect Tool from Power Source Assembling Auxiliary END Table AssemblyAdjusting Table Position Operating Controls and AdjustmentsAdjusting Tilting Table Adjusting Short PlatenAdjusting Auxiliary END Table Adjusting Long PlatenAdjusting Pulley Alignment Adjusting Belt TrackingEdge Sanding OperationsContour Sanding around the Drive Pulley Contour Sanding around the Auxiliary Abrasive Drum SpindleChanging Sanding Belts MaintenanceChanging Abrasive Sleeves Changing Graphite PadsChanging Drum Spindles Important Disconnect Tool from Power SourceCanadian PORTER-CABLE Delta Service Centers

31-392, 31-390 specifications

Delta 31-390 and 31-392 are advanced aircraft models that stand out in the aviation industry for their unique features and cutting-edge technologies. Designed with a focus on efficiency, safety, and comfort, these aircraft are ideal for a variety of aviation applications, including commercial transport, cargo delivery, and specialized missions.

One of the main features of Delta 31-390 and 31-392 is their aerodynamic design, which significantly enhances fuel efficiency. The sleek fuselage, combined with advanced wing configurations, reduces drag while improving lift. This results in lower fuel consumption, making these aircraft environmentally friendly while also reducing operating costs for airlines and operators.

The powerplants on these models are among the most advanced in the aviation sector. Equipped with high-performance turbofan engines, the Delta 31-390 and 31-392 deliver impressive thrust capabilities while maintaining lower noise levels during flight. The engines incorporate the latest noise reduction technologies, ensuring compliance with stringent noise regulations, making them suitable for operations in noise-sensitive areas.

Safety features are paramount in the design of the Delta 31-390 and 31-392. The aircraft are fitted with state-of-the-art avionics systems that provide pilots with real-time data and advanced navigation capabilities. The inclusion of fly-by-wire technology enhances control and stability during various flight conditions. Additionally, the aircraft's multi-layered safety systems, including redundant systems for critical functions, ensure a high level of operational safety and reliability.

Comfort is another significant aspect of these aircraft. The interior of the Delta 31-390 and 31-392 boasts spacious cabins designed with passenger comfort in mind. Ample legroom, ergonomic seating, and modern amenities contribute to an enjoyable flying experience. The incorporation of advanced climate control systems further enhances passenger comfort by maintaining optimal cabin conditions throughout the flight.

Both models are also equipped with advanced communication systems, ensuring that pilots can stay connected with air traffic control and ground support at all times. The aircraft's ability to integrate with emerging technologies, such as satellite communications, positions them for future advancements in aviation infrastructure.

In summary, Delta 31-390 and 31-392 are exemplary aircraft that combine efficiency, safety, and comfort. Their innovative technologies, including advanced aerodynamics, powerful turbofan engines, and sophisticated avionics, make them stand out in the competitive aviation market. As the industry continues to evolve, these models are well poise to meet the demands of modern aviation.
Top Page Image Contents