Delta 31-390, 31-392 instruction manual Disconnect Tool from Power Source

Page 8

ASSEMBLING AUXILIARY ABRASIVE DRUM AND SPINDLE ASSEMBLY TO DRIVE PULLEY

The auxiliary abrasive drum and spindle assembly is furnished as standard equipment with the edge sander and is used for finish sanding of small contour workpieces. To assemble the abrasive drum and spindle assembly, proceed as follows:

NOTE: The top guard and dust chute assembly has been removed for clarity.

1.DISCONNECT TOOL FROM POWER SOURCE.

2.Align the three holes (A) Fig. 11, in adapter plate (B) with three holes in top of drive pulley (C) and fasten adapter plate (B) Fig. 12, to drive pulley with three 5/16-

18x 3/4" long flat head screws (D).

3.Three abrasive drum spindles are supplied as stand- ard equipment with the edge sander. Loosen set screw

(E) Fig. 13, in adapter plate (B), and insert the desired abrasive drum spindle, one of which is shown at (F), into the adapter plate (B). NOTE: Make certain flat on spindle

(F) is facing set screw (E).

4.Firmly tighten set screw (E) Fig. 14, to fasten drum spindle (F) in place.

5.Assemble the proper abrasive sleeve (G) Fig. 15, over the desired drum spindle (F). NOTE: There are three abrasive sleeves supplied, with inside diameters of 1- 1/2", 2" and 3" which will fit over the abrasive drum spindles (F) Fig.16 supplied. IMPORTANT: If the abrasive sleeve (G) will not slide over the spindle drum

(F) Fig. 15, smoothly, loosen spindle nut (H) until abrasive sleeve (G) fits on spindle drum (F).

6.Tighten spindle nut (H) Fig. 16, to hold abrasive sleeve

(G) firmly on spindle drum.

A

B

C

Fig. 11

D

B

Fig. 12

F

F

B

E

Fig. 14

H

G

F

Fig. 16

8

 

E

Fig. 13

G

H

F

Fig. 15

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Edge Sander General Safety Rules Refer to them often Use them to instruct others Power Connections Unpacking and Cleaning Extension CordsAssembly Assembling Legs to Edge SanderAssembling Belt Tension Lever Disconnect Tool from Power Source Assembling Auxiliary END Table Assembly Disconnect Tool from Power SourceOperating Controls and Adjustments Adjusting Table PositionAdjusting Tilting Table Adjusting Short PlatenAdjusting Long Platen Adjusting Auxiliary END TableAdjusting Belt Tracking Adjusting Pulley AlignmentOperations Edge SandingContour Sanding around the Drive Pulley Contour Sanding around the Auxiliary Abrasive Drum SpindleMaintenance Changing Sanding BeltsChanging Abrasive Sleeves Changing Graphite PadsImportant Disconnect Tool from Power Source Changing Drum SpindlesCanadian PORTER-CABLE Delta Service Centers

31-392, 31-390 specifications

Delta 31-390 and 31-392 are advanced aircraft models that stand out in the aviation industry for their unique features and cutting-edge technologies. Designed with a focus on efficiency, safety, and comfort, these aircraft are ideal for a variety of aviation applications, including commercial transport, cargo delivery, and specialized missions.

One of the main features of Delta 31-390 and 31-392 is their aerodynamic design, which significantly enhances fuel efficiency. The sleek fuselage, combined with advanced wing configurations, reduces drag while improving lift. This results in lower fuel consumption, making these aircraft environmentally friendly while also reducing operating costs for airlines and operators.

The powerplants on these models are among the most advanced in the aviation sector. Equipped with high-performance turbofan engines, the Delta 31-390 and 31-392 deliver impressive thrust capabilities while maintaining lower noise levels during flight. The engines incorporate the latest noise reduction technologies, ensuring compliance with stringent noise regulations, making them suitable for operations in noise-sensitive areas.

Safety features are paramount in the design of the Delta 31-390 and 31-392. The aircraft are fitted with state-of-the-art avionics systems that provide pilots with real-time data and advanced navigation capabilities. The inclusion of fly-by-wire technology enhances control and stability during various flight conditions. Additionally, the aircraft's multi-layered safety systems, including redundant systems for critical functions, ensure a high level of operational safety and reliability.

Comfort is another significant aspect of these aircraft. The interior of the Delta 31-390 and 31-392 boasts spacious cabins designed with passenger comfort in mind. Ample legroom, ergonomic seating, and modern amenities contribute to an enjoyable flying experience. The incorporation of advanced climate control systems further enhances passenger comfort by maintaining optimal cabin conditions throughout the flight.

Both models are also equipped with advanced communication systems, ensuring that pilots can stay connected with air traffic control and ground support at all times. The aircraft's ability to integrate with emerging technologies, such as satellite communications, positions them for future advancements in aviation infrastructure.

In summary, Delta 31-390 and 31-392 are exemplary aircraft that combine efficiency, safety, and comfort. Their innovative technologies, including advanced aerodynamics, powerful turbofan engines, and sophisticated avionics, make them stand out in the competitive aviation market. As the industry continues to evolve, these models are well poise to meet the demands of modern aviation.
Top Page Image Contents