Delta 31-392, 31-390 Operations, Edge Sanding, Contour Sanding around the Drive Pulley

Page 13

OPERATIONS

EDGE SANDING

When edge sanding, it is advisable to raise one end of the table as shown in Fig. 36. This allows cooler belt running, prevents spot wear, reduces material burning and promotes longer belt life. The table should be positioned so it is close to, but not contacting the sanding belt.

CONTOUR SANDING AROUND THE DRIVE PULLEY

IMPORTANT: The hinged dust chute (A) Fig. 37, must be flipped up to allow contour sanding around the drive pulley (C). The auxiliary end table (B) should be used to support the workpiece. The table (B) should be positioned close to, but not touching the sanding belt

(C). It is advisable to raise or lower the table (B) periodically to prevent spot wear and improve belt life.

CONTOUR SANDING AROUND THE AUXILIARY ABRASIVE DRUM SPINDLE

IMPORTANT: The hinged dust chute (A) Fig. 38, must be flipped up to allow contour sanding around the auxiliary abrasive drum (B). Whenever possible the auxiliary end table (C) should be used to support the workpiece when contour sanding. The auxiliary end table (C) should be positioned close to but not touching the abrasive drum

(B). It is advisable to raise or lower the table (C) periodically prevent spot wear and improve drum life.

Fig. 36

A

C

B

Fig. 37

B A

C

Fig. 38

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Edge Sander General Safety Rules Refer to them often Use them to instruct others Power Connections Extension Cords Unpacking and CleaningAssembling Legs to Edge Sander AssemblyAssembling Belt Tension Lever Disconnect Tool from Power Source Disconnect Tool from Power Source Assembling Auxiliary END Table AssemblyAdjusting Table Position Operating Controls and AdjustmentsAdjusting Tilting Table Adjusting Short PlatenAdjusting Auxiliary END Table Adjusting Long PlatenAdjusting Pulley Alignment Adjusting Belt TrackingEdge Sanding OperationsContour Sanding around the Drive Pulley Contour Sanding around the Auxiliary Abrasive Drum SpindleChanging Sanding Belts MaintenanceChanging Abrasive Sleeves Changing Graphite PadsChanging Drum Spindles Important Disconnect Tool from Power SourceCanadian PORTER-CABLE Delta Service Centers

31-392, 31-390 specifications

Delta 31-390 and 31-392 are advanced aircraft models that stand out in the aviation industry for their unique features and cutting-edge technologies. Designed with a focus on efficiency, safety, and comfort, these aircraft are ideal for a variety of aviation applications, including commercial transport, cargo delivery, and specialized missions.

One of the main features of Delta 31-390 and 31-392 is their aerodynamic design, which significantly enhances fuel efficiency. The sleek fuselage, combined with advanced wing configurations, reduces drag while improving lift. This results in lower fuel consumption, making these aircraft environmentally friendly while also reducing operating costs for airlines and operators.

The powerplants on these models are among the most advanced in the aviation sector. Equipped with high-performance turbofan engines, the Delta 31-390 and 31-392 deliver impressive thrust capabilities while maintaining lower noise levels during flight. The engines incorporate the latest noise reduction technologies, ensuring compliance with stringent noise regulations, making them suitable for operations in noise-sensitive areas.

Safety features are paramount in the design of the Delta 31-390 and 31-392. The aircraft are fitted with state-of-the-art avionics systems that provide pilots with real-time data and advanced navigation capabilities. The inclusion of fly-by-wire technology enhances control and stability during various flight conditions. Additionally, the aircraft's multi-layered safety systems, including redundant systems for critical functions, ensure a high level of operational safety and reliability.

Comfort is another significant aspect of these aircraft. The interior of the Delta 31-390 and 31-392 boasts spacious cabins designed with passenger comfort in mind. Ample legroom, ergonomic seating, and modern amenities contribute to an enjoyable flying experience. The incorporation of advanced climate control systems further enhances passenger comfort by maintaining optimal cabin conditions throughout the flight.

Both models are also equipped with advanced communication systems, ensuring that pilots can stay connected with air traffic control and ground support at all times. The aircraft's ability to integrate with emerging technologies, such as satellite communications, positions them for future advancements in aviation infrastructure.

In summary, Delta 31-390 and 31-392 are exemplary aircraft that combine efficiency, safety, and comfort. Their innovative technologies, including advanced aerodynamics, powerful turbofan engines, and sophisticated avionics, make them stand out in the competitive aviation market. As the industry continues to evolve, these models are well poise to meet the demands of modern aviation.
Top Page Image Contents