Delta 31-390, 31-392 instruction manual Assembly, Assembling Legs to Edge Sander

Page 6

ASSEMBLY

WARNING: DO NOT OPERATE THIS TOOL UNTIL YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL.

ASSEMBLING LEGS TO EDGE SANDER

Carefully assemble the two support legs to the base of the edge sander as follows:

1.Fasten each support leg (C) Fig. 3, to the base of the machine (A) with five 3/8-16 x 1" hex head screws, ten flat flatwashers, five lockwashers and hex nuts, (D) Fig.

3.Assemble flat flatwashers to screws, insert screws through holes then assemble flatwashers, then lockwashers, then hex nuts and tighten firmly.

2.Fig. 4, illustrates both legs (C) assembled to the base of the sander (A).

A

C

D

Fig. 3

ASSEMBLING STARTER BOX TO CABINET (MAGNETIC CONTROL MODELS ONLY)

Your edge sander is supplied with magnetic starter, controls, transformer and overload block (LVC), the starter box is shipped completely wired to the motor and push button controls. However, the starter box must be assembled to the base of the machine as follows:

1.Assemble the starter box (A) Fig. 5, to the base of the sander using two 1/4-20 x 1/2" hex head screws (B) with star flatwashers, through the rear of the two pre-drilled holes (D) in the machine base and into the two tapped holes (C) in the back of starter box.

2.Fig. 6, illustrates the starter box (A) assembled to the base of the sander.

A

Fig. 6

A

C

Fig. 4

AD

B

C

Fig. 5

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Edge Sander General Safety Rules Refer to them often Use them to instruct others Power Connections Unpacking and Cleaning Extension CordsAssembly Assembling Legs to Edge SanderAssembling Belt Tension Lever Disconnect Tool from Power Source Assembling Auxiliary END Table Assembly Disconnect Tool from Power SourceAdjusting Tilting Table Operating Controls and AdjustmentsAdjusting Table Position Adjusting Short PlatenAdjusting Long Platen Adjusting Auxiliary END TableAdjusting Belt Tracking Adjusting Pulley AlignmentContour Sanding around the Drive Pulley OperationsEdge Sanding Contour Sanding around the Auxiliary Abrasive Drum SpindleChanging Abrasive Sleeves MaintenanceChanging Sanding Belts Changing Graphite PadsImportant Disconnect Tool from Power Source Changing Drum SpindlesCanadian PORTER-CABLE Delta Service Centers

31-392, 31-390 specifications

Delta 31-390 and 31-392 are advanced aircraft models that stand out in the aviation industry for their unique features and cutting-edge technologies. Designed with a focus on efficiency, safety, and comfort, these aircraft are ideal for a variety of aviation applications, including commercial transport, cargo delivery, and specialized missions.

One of the main features of Delta 31-390 and 31-392 is their aerodynamic design, which significantly enhances fuel efficiency. The sleek fuselage, combined with advanced wing configurations, reduces drag while improving lift. This results in lower fuel consumption, making these aircraft environmentally friendly while also reducing operating costs for airlines and operators.

The powerplants on these models are among the most advanced in the aviation sector. Equipped with high-performance turbofan engines, the Delta 31-390 and 31-392 deliver impressive thrust capabilities while maintaining lower noise levels during flight. The engines incorporate the latest noise reduction technologies, ensuring compliance with stringent noise regulations, making them suitable for operations in noise-sensitive areas.

Safety features are paramount in the design of the Delta 31-390 and 31-392. The aircraft are fitted with state-of-the-art avionics systems that provide pilots with real-time data and advanced navigation capabilities. The inclusion of fly-by-wire technology enhances control and stability during various flight conditions. Additionally, the aircraft's multi-layered safety systems, including redundant systems for critical functions, ensure a high level of operational safety and reliability.

Comfort is another significant aspect of these aircraft. The interior of the Delta 31-390 and 31-392 boasts spacious cabins designed with passenger comfort in mind. Ample legroom, ergonomic seating, and modern amenities contribute to an enjoyable flying experience. The incorporation of advanced climate control systems further enhances passenger comfort by maintaining optimal cabin conditions throughout the flight.

Both models are also equipped with advanced communication systems, ensuring that pilots can stay connected with air traffic control and ground support at all times. The aircraft's ability to integrate with emerging technologies, such as satellite communications, positions them for future advancements in aviation infrastructure.

In summary, Delta 31-390 and 31-392 are exemplary aircraft that combine efficiency, safety, and comfort. Their innovative technologies, including advanced aerodynamics, powerful turbofan engines, and sophisticated avionics, make them stand out in the competitive aviation market. As the industry continues to evolve, these models are well poise to meet the demands of modern aviation.
Top Page Image Contents