Delta SA446 instruction manual Belt / 6 Disc Sander

Page 1

4" Belt / 6" Disc Sander

(Model SA446)

INSTRUCTION MANUAL

PART NO. 905578 -05-03-02

Copyright © 2002 Delta Machinery

To learn more about DELTA MACHINERY	ESPAÑOL: PÁGINA 21
visit our website at: www.deltamachinery.com.
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Belt / 6 Disc Sander General Safety Rules Refer to them often Use them to instruct others Additional Safety Rules for Belt / Disc SandersPower Connections Extension Cords Unpacking and CleaningSander Parts Belt / 6 Disc Sander PartsAdjusting Belt Tension Assembly InstructionsAssembling Sanding Disc Plate Assembling Belt Pulley GuardAssembling Lower Cover for Sanding Disc Assembling Sanding DiscAssembling Disc Sander Table Assembling Dust Chute Fastening Sander to Supporting SurfaceAssembling Backstop to Sanding ARM Starting Stopping Sander Operating Controls AdjustmentsTracking Sanding Belt Locking Switch OFF PositionChanging Position of Sanding ARM Adjusting Table Square with Sanding Disc Adjusting Backstop Square With Sanding BeltTilting the Table Miter Gage Adjusting Miter Gage Slot Parallel with Sanding DiscWrench Storage Dust ChuteReplacing Sanding Disc Replacing Sanding BeltSurfacing or Edge Sanding With Sanding Belt OperationSanding Outside Curves Sanding Inside CurvesEND Sanding With the Belt END Sanding With the DiscPage Two Year Limited Warranty Accessories PARTS, Service or Warranty Assistance