Delta SA446 Accessories PARTS, Service or Warranty Assistance, Two Year Limited Warranty

Page 20

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

WARNING: Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

Printed in U.S.A.

20

Image 20
Contents Belt / 6 Disc Sander General Safety Rules Additional Safety Rules for Belt / Disc Sanders Refer to them often Use them to instruct othersPower Connections Unpacking and Cleaning Extension CordsBelt / 6 Disc Sander Parts Sander PartsAssembly Instructions Adjusting Belt TensionAssembling Belt Pulley Guard Assembling Sanding Disc PlateAssembling Disc Sander Table Assembling Sanding DiscAssembling Lower Cover for Sanding Disc Assembling Backstop to Sanding ARM Fastening Sander to Supporting SurfaceAssembling Dust Chute Operating Controls Adjustments Starting Stopping SanderChanging Position of Sanding ARM Locking Switch OFF PositionTracking Sanding Belt Tilting the Table Adjusting Backstop Square With Sanding BeltAdjusting Table Square with Sanding Disc Adjusting Miter Gage Slot Parallel with Sanding Disc Miter GageDust Chute Wrench StorageReplacing Sanding Belt Replacing Sanding DiscOperation Surfacing or Edge Sanding With Sanding BeltSanding Inside Curves Sanding Outside CurvesEND Sanding With the Belt END Sanding With the DiscPage Accessories PARTS, Service or Warranty Assistance Two Year Limited Warranty