Delta 31-695 instruction manual Belt / 9 Disc Sander

Page 1

6" Belt / 9" Disc Sander

(Model 31-695)

INSTRUCTION MANUAL

PART NO. 902122 (0112)

Copyright © 2001 Delta Machinery

To learn more about DELTA MACHINERY	ESPAÑOL: PÁGINA 21
visit our website at: www.deltamachinery.com.
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Belt / 9 Disc Sander General Safety Rules Refer to them often Use them to instruct others Additional Safety Rules for Belt / Disc SandersMotor Specifications Power ConnectionsGrounding Instructions Extension Cords Unpacking and CleaningUnpacking Assembling Drive Belt and Adjusting Belt Tension Assembly InstructionsAssembling Stand Assembling Machine to StandAssembling Sanding Disc Plate Assembling Belt Pulley GuardAssembling Sanding Disc to Disc Plate Assembling Disc Sander Table Assembling Lower Cover for Sanding DiscStarting Stopping Sander Tracking Sanding Belt Locking Switch OFF PositionChanging Position of Sanding ARM Adjusting Backstop Square with Sanding Belt Adjusting Sanding ARM StopTilting the Table Adjusting Miter Gage Slot Parallel with Sanding Disc Adjusting Table Square with Sanding DiscDust Spout Accessory Miter GageWrench Storage Adjusting Dust ShieldRemoving Upper Sanding Drum Guard Replacing Sanding Belt Surfacing or Edge Sanding with Sanding Belt Replacing Sanding DiscSanding Outside Curves Sanding Inside CurvesEND Sanding With the Disc END Sanding Wide Workpieces with the BeltAccessories PARTS, Service or Warranty Assistance