ADJUSTING DUST SHIELD
If your sander is connected to a dust collection system, the sander is equipped with a manually operated dust shield (A) Fig. 36, which must be adjusted to suit the sanding operation.
1.If you are sanding with the disc, push in on dust shield (A) Fig. 36.
2.If you are sanding on the belt, pull dust shield (A) Fig. 37, outward.
WRENCH STORAGE
A hole is provided in the stand for storing the hex wrench
(A) Fig. 38, supplied with the sander.
REMOVING UPPER SANDING DRUM GUARD
The upper sanding drum guard (A) Fig. 39, can be removed easily, if necessary, when sanding inside curved work on the idler drum or changing belts.
1.Pull outward on guard (A).
2.After sanding operation is completed or belt changed, replace guard (A) Fig. 39, on two studs (B), one of which is shown.
A
Fig. 36
A
Fig. 37
A
Fig. 38
B
A
Fig. 39
14