Delta 31-695 instruction manual Accessories PARTS, Service or Warranty Assistance

Page 18

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

WARNING: Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

Printed in U.S.A.

18

Image 18
Contents Belt / 9 Disc Sander General Safety Rules Additional Safety Rules for Belt / Disc Sanders Refer to them often Use them to instruct othersPower Connections Motor SpecificationsGrounding Instructions Unpacking and Cleaning Extension CordsUnpacking Assembling Stand Assembly InstructionsAssembling Drive Belt and Adjusting Belt Tension Assembling Machine to StandAssembling Belt Pulley Guard Assembling Sanding Disc PlateAssembling Sanding Disc to Disc Plate Assembling Lower Cover for Sanding Disc Assembling Disc Sander TableStarting Stopping Sander Locking Switch OFF Position Tracking Sanding BeltChanging Position of Sanding ARM Adjusting Sanding ARM Stop Adjusting Backstop Square with Sanding BeltTilting the Table Adjusting Table Square with Sanding Disc Adjusting Miter Gage Slot Parallel with Sanding DiscAccessory Miter Gage Dust SpoutAdjusting Dust Shield Wrench StorageRemoving Upper Sanding Drum Guard Replacing Sanding Belt Replacing Sanding Disc Surfacing or Edge Sanding with Sanding BeltEND Sanding With the Disc Sanding Inside CurvesSanding Outside Curves END Sanding Wide Workpieces with the BeltAccessories PARTS, Service or Warranty Assistance