Schumacher SI263 manual Positive-Grounded System

Page 17

Negative-Grounded System (Standard)

6. Clean and store the Battery Manager in a dry location.

Positive-Grounded System

1.To connect to a positive-grounded system, attach the black NEGATIVE output clamp to the NEGATIVE post of the battery. Twist the clamp back and forth to ensure a solid electrical connection is made.

2.Connect the red POSITIVE output clamp to a heavy, unpaint- ed metal part of the chassis or engine block, away from the battery. DO NOT connect to the positive battery post, carbu- retor, and fuel line or sheet metal part.

POSITIVENEGATIVE

BATTERY CHARGER

BATTERY

24", 6 GAUGE CABLE

POWER CORD

TO

GROUNDED

POWER

OUTLET

17

SI263 IM 0205v1.indd 17

3/2/05 4:41:08 PM

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Intelligent Battery Manager Dear Sharper Image Customer Table of Contents Table of Contents Important Safety Precautions SI263 IM 0205v1.indd 05 44107 PM SI263 IM 0205v1.indd 05 44107 PM SI263 IM 0205v1.indd 05 44107 PM Personal Safety Precautions Charging Preparation PowerFeatures Extension Cord Minimum Recommended Extension Cord UseBattery Preparation Operation Charging Battery in the VehicleSI263 IM 0205v1.indd 05 44108 PM Negative-Grounded System Standard Positive-Grounded System Charging a Removed Battery Charging a Removed Battery Charge Rate Operating FeaturesBattery Type Button General Notes Charging Tips Maintenence and Care Problem Possible Cause Solution TroubleshootingTroubleshooting Problem Charged LED Problem Possible Cause Solution Statement of FCC Compliance FCC Label Compliance Statement Warranty
Top Page Image Contents