Schumacher SI263 manual Problem

Page 27

Troubleshooting

PROBLEM

POSSIBLE CAUSE SOLUTION

The CHECK

This happens if the

(red) LED always

battery does not

flashes before the

reach full charge

battery is com-

within 24 hours.

pletely charged.

May be due to a

 

very large battery

 

or a bank of batter-

 

ies requiring more

 

power than the

 

Battery Manager

 

can deliver in 24

 

hours. The battery

 

may also be

 

defective.

Reset the Battery Manager by unplug- ging it. Select the desired charge rate and battery type again, if necessary.

27

SI263 IM 0205v1.indd 27

3/2/05 4:41:09 PM

Image 27
Contents Intelligent Battery Manager Dear Sharper Image Customer Table of Contents Table of Contents Important Safety Precautions SI263 IM 0205v1.indd 05 44107 PM SI263 IM 0205v1.indd 05 44107 PM SI263 IM 0205v1.indd 05 44107 PM Personal Safety Precautions Charging Preparation PowerFeatures Extension Cord Minimum Recommended Extension Cord UseBattery Preparation Operation Charging Battery in the VehicleSI263 IM 0205v1.indd 05 44108 PM Negative-Grounded System Standard Positive-Grounded System Charging a Removed Battery Charging a Removed Battery Charge Rate Operating FeaturesBattery Type Button General Notes Charging Tips Maintenence and Care Problem Possible Cause Solution TroubleshootingTroubleshooting Problem Charged LED Problem Possible Cause Solution Statement of FCC Compliance FCC Label Compliance Statement Warranty