Schumacher SI263 manual Charged LED

Page 28

Troubleshooting

PROBLEM

POSSIBLE CAUSE SOLUTION

The green

The battery may

CHARGED LED

be fully charged or

switches on a

recently charged,

few minutes after

leaving the battery

connecting to the

voltage high enough

battery.

to appear to be fully

 

charged.

If the battery is in a vehicle, turn the headlights on for a few minutes to reduce the bat- tery voltage and try charging again. Also try a lower CHARGE RATE selection.

The Battery Man-

The Battery Man-

No problem. This is

ager is making an

ager has a relay that

a normal condition.

audible clicking

switches the current

 

sound.

to the battery on

 

 

and off.

 

28

SI263 IM 0205v1.indd 28

3/2/05 4:41:09 PM

Image 28
Contents Intelligent Battery Manager Dear Sharper Image Customer Table of Contents Table of Contents Important Safety Precautions SI263 IM 0205v1.indd 05 44107 PM SI263 IM 0205v1.indd 05 44107 PM SI263 IM 0205v1.indd 05 44107 PM Personal Safety Precautions Power Charging PreparationFeatures Extension Cord Use Extension Cord Minimum RecommendedBattery Preparation Charging Battery in the Vehicle OperationSI263 IM 0205v1.indd 05 44108 PM Negative-Grounded System Standard Positive-Grounded System Charging a Removed Battery Charging a Removed Battery Operating Features Charge RateBattery Type Button General Notes Charging Tips Maintenence and Care Troubleshooting Problem Possible Cause SolutionTroubleshooting Problem Charged LED Problem Possible Cause Solution Statement of FCC Compliance FCC Label Compliance Statement Warranty