10.control panel
Digital Display
The Digital Display gives a digital indication of % of charge or voltage, depending on the Display Mode chosen.
Display Mode Button
Use this button to set the function of the Digital Display to one of the following:
•Battery % – The Digital Display shows an estimated charge percent of the battery connected to the charger battery clamps.
•Voltage – The Digital Display shows the voltage at the charger battery clamps in DC volts.
Battery Size/Charge Rate Button
Use this button to select the correct battery size/charge rate to one of the following:
•Small Charge Rate – Intended for charging small batteries such as those commonly used in garden tractors, snow mobiles and motorcycles.
•Medium Charge Rate – Use for charging automotive, marine and
•Large Charge Rate – Use for charging automotive, marine and light truck batteries.
Not intended for industrial applications.
Battery Type Button
Use this button to set the type of battery to be charged.
•6V
•12V
•Regular (Standard)
•AGM
•GEL
11.operating instructions
This battery charger must be properly assembled in accordance with the assembly instructions before it is used.
Charging
1.Ensure that all of the charger components are in place and in good working condition, including the plastic boots on the battery clips.
2.Connect the battery following the precautions listed in Sections 6 and 7.
3.Connect the AC power following the precautions listed in Section 8.
4.Select the appropriate settings for your battery.
NOTE: This charger is equipped with an
Battery Connection Indicator
If the charger does not detect a properly connected battery, the CONNECTED (red) LED will not light. Charging will not begin if the CONNECTED (red) LED is not on.
Automatic Charging Mode
When an automatic charge is performed, the charger switches to the maintain mode (see below) automatically after the battery is charged.
Aborted Charge
Models
Aborted Charge
Models
• 5 •