Schumacher SC-6000A owner manual Personal Safety Precautions

Page 4

Never place charger directly above battery being charged. The gases from the battery will corrode and damage the charger.

Never touch the battery clamps together when the charger is on. You could cause a spark.

Never operate charger if it has received a hard blow, been dropped, or otherwise damaged. Take it to a qualified profes- sional for inspection and repair.

Be sure to position the charger power cord to prevent it from being stepped on, tripped over, or damaged.

Never pull out the plug by the cord when unplugging the SpeedCharge. Pulling on the cord may cause damage to the cord or the plug.

Do not operate the SpeedCharge if it has a damaged power cord or plug. Have the cord replaced.

PERSONAL SAFETY PRECAUTIONS

•Wear complete eye and clothing protection when working with lead- acid batteries.

•Make sure that someone is within range of your voice to come to your aid if needed while you work with or are near a lead-acid battery.

•Have plenty of fresh water and soap nearby for use in case battery acid contacts your eyes, skin, or clothing. If this happens, wash immediately with soap and water. Then get medical attention.

•Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your eyes. If this occurs, flush eyes immediately with running cold water for at least 10 minutes. Then immediately get medical attention.

•Never charge a frozen battery.

•Remove all personal metal items from your body such as rings, bracelets, necklaces and watches, while working with a lead-acid battery. A battery can produce a short circuit current high enough to weld a ring (or the like) to metal, causing a severe burn.

•Take care not to drop any metal tool or metal object onto the battery. This may spark or short circuit the battery or another electrical device that may cause an explosion.

•Always operate the battery charger in an open, well-ventilated area.

•Never smoke or allow a spark or flame in the vicinity of the battery or engine. Batteries generate explosive gases.

•Neutralize any acid spills thoroughly with baking soda before attempting to clean up.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Electric Corporation Table of Contents Important Safety Instructions Help US Help YOUPersonal Safety Precautions Before Using Your Battery Charger Preparing Your Battery to be ChargedUsing AN Extension Cord Plugging ITCharging Battery in the Vehicle Connecting to a positive-groundedOperating Instructions Negative Grounded SystemCharging Battery Removed from the Vehicle Using Engine StartSC-6000A Control Panel Display Mode Switch Battery Type SwitchCharge Rate Switch Speedcharge ControlMode of Operation CellDigital DisplayUsing the BUILT-IN Battery Tester Using the BUILT-IN Alternator Tester Using Your Engine StarterAlternator Testing Notes Starting SequenceUsing Your Battery Charger Engine Starting Notes30A Charge Rate When set to Charging TipsBattery Percent and Charge Time Maintenance and Care TroubleshootingProblem Possible Cause Solution Limited Warranty

SC-6000A specifications

The Schumacher SC-6000A is an advanced battery charger and maintainer designed for optimal performance in charging automotive batteries. This device is an essential tool for both automotive enthusiasts and everyday drivers who wish to ensure their battery is always charged and ready for use.

One of the standout features of the SC-6000A is its microprocessor-controlled technology, which allows it to automatically adjust the charging rate based on the battery’s needs. This intelligent charging system not only enhances battery life but also ensures faster charging times, making it both efficient and effective.

The unit is compatible with various battery types, including both lead-acid and AGM (Absorbent Glass Mat) batteries, which provides versatility for users with different vehicles or battery setups. The SC-6000A supports a wide voltage range, making it suitable for 6V and 12V batteries, further broadening its usability across different automotive applications.

Safety is a top priority with the SC-6000A. It incorporates multiple safety features that protect against overload, short circuits, and reverse polarity, ensuring that users can operate the device without fear of damaging their batteries or the charger itself. Additionally, it comes with an automatic shut-off function that prevents overcharging, adding another layer of security during charging cycles.

The SC-6000A is lightweight and portable, making it easy to store and carry. Its user-friendly interface, equipped with LED indicators, provides clear insights into the charging status and battery condition. This allows users to monitor the process effectively without complicated setups.

Moreover, this charger includes a battery maintainer function that is particularly beneficial for vehicles that are not used regularly. This feature can help in maintaining battery health over long periods, preventing sulfation, which can lead to reduced battery life.

In summary, the Schumacher SC-6000A is a reliable and versatile battery charger that stands out in the market for its smart technology, safety features, and compatibility with various battery types. Whether for routine battery maintenance or emergency charging, the SC-6000A proves to be a valuable asset for any vehicle owner.
Top Page Image Contents