Personal Precautions, Preparing to Charge

2.To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of battery. Review cautionary marking on these products and on engine.

C.PERSONAL PRECAUTIONS

1.Someone should be within range of your voice or close enough to come to your aid when you work near a lead-acid battery.

2.Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.

3.Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery.

4.If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood eye with running cold water for at least 10 minutes and get medical attention immediately.

5.NEVER smoke or allow a spark or flame in vicinity of battery or engine.

6.Be extra cautious to reduce risk of dropping a metal tool onto battery. it might spark or short-circuit battery or other electrical part that may cause explosion.

7.Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring or the like to metal, causing a severe burn.

8.Use charger for charging a LEAD-ACID battery only. It is not intended to supply power to a low-voltage electrical system other than in an automotive application. Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property.

9.NEVER charge a frozen battery.

10.WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

D.PREPARING TO CHARGE

1.If necessary to remove battery from vehicle to charge, always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.

2.Be sure area around battery is well ventilated while battery is being charged. Gas can be forcefully blown away by using a piece of cardboard or other nonmetallic material as a fan.

3.Clean battery terminals. Be careful to keep corrosion from coming in contact with eyes.

4.Add distilled water in each cell until battery acid reaches level specified by battery manu- facturer. This helps purge excessive gas from cells. Do not overfill. For a battery without cell caps, carefully follow manufacturer’s recharting instructions.

5.Study all battery manufacturer’s specific precautions such as removing or not removing cell caps while charging and recommended rates or charge.

6.Determine voltage of battery by referring to car owner’s manual and make sure that output voltage selector switch is set as correct voltage. If charger has adjustable charge rate, charge battery initially at lowest rate.

E.CHARGER LOCATION

1.Locate charger as far away from battery as DC cables permit.

2.Never place charger directly above battery being charged; gases from battery will corrode and damage charger.

3.Never allow battery acid to drip on charger when reading gravity or filling battery.

4.Do not operate charger in a closed-in area or restrict ventilation in any way.

5.Do not set a battery on top of charger.

6.Do not expose charger to rain or snow.

Page 2

82-6-PE, 1010-2-PE specifications

The Schumacher 1010-2-PE and 82-6-PE models are innovative and high-performance power solutions designed for diverse applications ranging from industrial to home usage. These chargers are known for their advanced features, efficiency, and robust construction.

The Schumacher 1010-2-PE is a versatile battery charger that primarily caters to 12V and 24V lead-acid batteries, making it suitable for a wide range of vehicles from motorcycles to heavy-duty trucks. One of its standout features is its smart microprocessor technology, which continuously monitors the battery status, optimizing the charging process. This ensures that the battery is charged efficiently, prolonging its lifespan and maintaining its health.

Another remarkable characteristic of the 1010-2-PE is its multi-stage charging capability. It employs a smart charging algorithm that transitions through various stages: bulk, absorption, and maintenance. This approach not only speeds up the charging process but also minimizes the risk of overcharging, which can damage the battery. Additionally, the charger has reverse polarity protection, providing an extra layer of safety against incorrect connections.

On the other hand, the Schumacher 82-6-PE model is engineered for peak performance with an emphasis on portability and user-friendliness. This model features a compact design that makes it easy to transport and store, yet it does not compromise on charging power. It is capable of providing rapid charging to various battery types, including AGM and Gel batteries.

The 82-6-PE is equipped with LED indicators that display the charging status, allowing users to monitor the process at a glance. Furthermore, it includes a built-in cooling fan that helps maintain optimal operating temperatures during the charging cycle, significantly improving reliability and efficiency.

Both models exemplify Schumacher's commitment to quality and innovation. Their durable construction ensures longevity, while advanced safety features like short-circuit protection and over-temperature protection offer peace of mind during operation.

In conclusion, the Schumacher 1010-2-PE and 82-6-PE are exemplary battery chargers that embody cutting-edge technology and user-centric design. They cater to a wide array of charging needs, making them ideal choices for both professionals and casual users seeking dependable power solutions.