Schumacher 1010-2-PE, 82-6-PE important safety instructions Electric Corp

Page 1

ELECTRIC CORP.

801 BUSINESS CENTER DRIVE • MOUNT PROSPECT, ILLINOIS 60056-2179

Send Warranty Product Repairs to: 1025 E. Thompson Ave., Hoopeston, IL 60942-0280.

Call Customer Service if you have questions: 1-800-621-5485

A.IMPORTANT SAFETY INSTRUCTIONS

1.SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger MODELS: 82-6-PE and 1010-2-PE A BATTERY CHARGER RECEIVES AC POWER FROM THE ELECTRIC OUTLET, AND DELIVERS DC CURRENT TO THE BATTERY.

2.Before using battery charger, read all instructions and cautionary markings on (1 ) battery charger, (2) battery and (3) product using battery.

3.CAUTION - To reduce risk of injury, charge only lead acid type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

4.Do not expose charger to rain or snow.

5.Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

6.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

7.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

8.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

(a)That pins on plug of extension cord are the same number, size and shape as those of plug on charger;

(b)That extension cord is properly wired and in good electrical condition; and

(c)That wire size is large enough for AC ampere rating of charger as specified below:

AC INPUT RATING, AMPERES

 

 

AWG SIZE OF CORD

Equal to or

but less than

 

 

Length of Cord, Feet

Greater than

 

25

50

100

150

0

2

18

18

18

16

2

3

18

18

18

14

6

8

18

16

12

10

9.Do not operate charger with damaged cord or plug - replace them immediately.

10.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

11.Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

12.To reduce risk of electric shock, unplug charger from outlet before attempting any main- tenance or cleaning. Turning off controls will not reduce this risk.

B.WARNING - RISK OF EXPLOSIVE GASES

1.WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME BEFORE USING YOUR CHARGER, YOU READ THIS MANUAL AND FOLLOW THE INSTRUCTION EXACTLY.

00-00-000362/0103

Page 1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Electric Corp Preparing to Charge Personal PrecautionsCharger Location AC Power Cord Connection Operation Instructions DC Connection PrecautionsModel Switch Setting Output Current Selector SwitchProblem Checklist Output VoltageLimited Warranty Electric Corporation Instrucciones Importantes DE Seguridad Precauciones Personales Advertencia Riesgos CON Gases ExplosivosPreparativos Para Cargar Precauciones Para Coneccion DE Corriente Directa DC Posicion DEL CargadorInstrucciones DE Trabajo Conexion DEL Cable ACVoltaje DE Salida Interruptor Para Seleccionar LA Corriente DE EntradaAlmacenamiento Problemas CON Lista DE ChequeoGarantia

82-6-PE, 1010-2-PE specifications

The Schumacher 1010-2-PE and 82-6-PE models are innovative and high-performance power solutions designed for diverse applications ranging from industrial to home usage. These chargers are known for their advanced features, efficiency, and robust construction.

The Schumacher 1010-2-PE is a versatile battery charger that primarily caters to 12V and 24V lead-acid batteries, making it suitable for a wide range of vehicles from motorcycles to heavy-duty trucks. One of its standout features is its smart microprocessor technology, which continuously monitors the battery status, optimizing the charging process. This ensures that the battery is charged efficiently, prolonging its lifespan and maintaining its health.

Another remarkable characteristic of the 1010-2-PE is its multi-stage charging capability. It employs a smart charging algorithm that transitions through various stages: bulk, absorption, and maintenance. This approach not only speeds up the charging process but also minimizes the risk of overcharging, which can damage the battery. Additionally, the charger has reverse polarity protection, providing an extra layer of safety against incorrect connections.

On the other hand, the Schumacher 82-6-PE model is engineered for peak performance with an emphasis on portability and user-friendliness. This model features a compact design that makes it easy to transport and store, yet it does not compromise on charging power. It is capable of providing rapid charging to various battery types, including AGM and Gel batteries.

The 82-6-PE is equipped with LED indicators that display the charging status, allowing users to monitor the process at a glance. Furthermore, it includes a built-in cooling fan that helps maintain optimal operating temperatures during the charging cycle, significantly improving reliability and efficiency.

Both models exemplify Schumacher's commitment to quality and innovation. Their durable construction ensures longevity, while advanced safety features like short-circuit protection and over-temperature protection offer peace of mind during operation.

In conclusion, the Schumacher 1010-2-PE and 82-6-PE are exemplary battery chargers that embody cutting-edge technology and user-centric design. They cater to a wide array of charging needs, making them ideal choices for both professionals and casual users seeking dependable power solutions.
Top Page Image Contents