Schumacher 5216A-PE, 520A-PE, 612A-PE Personal Precautions and Safety, Preparing to Charge

Page 2

B.

PERSONAL PRECAUTIONS AND SAFETY

 

 

1.WARNING: Wear complete eye protection and clothing protection, when working with lead-acid batteries.

2.Make sure someone is within range of your voice or close enough to come to your aid when you work with or near a lead-acid battery.

3.Have plenty of fresh water and soap nearby for use if battery acid contacts skin, clothing, or eyes. If battery acid contacts skin or clothing, wash immediately with soap and water.

4.Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your eyes! If acid enters your eye, immediately flood eye with running cold water for at least 10 minutes. Get medical attention immediately.

5.Remove all personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring (or the like) to metal, causing a severe burn.

6.Take care not to drop a metal tool or other metal onto the battery. Metal may cause sparking or short circuit the battery or another electrical devise. Sparking may cause an explosion.

7.Always operate battery charger in an open well ventilated area.

8.NEVER smoke or allow a spark or flame in the vicinity of the battery or engine. Batteries generate explosive gases!

C.

PREPARING TO CHARGE

 

 

1.Check the battery voltage, for 6 volt batteries only the 6 volt 10 Amp automatic position is available, all other positions are for 12 volt batteries.

2.Clean battery terminals. Take care to keep corrosion from coming in contact with your eyes.

3.If required, add distilled water in each cell until battery acid reaches levels specified by battery manufacturer. This helps purge excessive gas from cells. Do not overfill. For a battery without cell caps, carefully follow manufacturer's recharging instructions.

4.Study all battery manufacturer's specific precautions, such as removing or not removing cell caps while charging, and recommended rates of charge.

5.Be sure area around battery is well ventilated while battery is being charged. Gas can be forcefully blown away by using a piece of cardboard or other non-metallic material as a fan.

6.If necessary to remove battery from vehicle to charge, always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.

7.A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use.

BATTERY SIZE/RATING

CAR / LIGHT

CCA

RES.

RECHARGE

TRUCKS

 

CAP

TIME-HOURS

 

200-315

40-60

3-5

 

315-550

60-85

5-9

 

550-850

85-150

9-13

 

 

 

 

MARINE / OR

MCA

AMP HR

 

DEEP CYCLE

220-350

24-40

3-5

 

350-600

40-70

5-9

 

600-935

70-104

9-13

 

 

 

 

CCA: COLD CRANKING AMPS

RES. CAP.: RESERVE CAPACITY

MCA: MARINE CRANKING AMPS

AMP HR: AMPERE HOUR

CHARGE TIME USING THE 2 AMP RATE

WITH SMALL AND MEDIUM SIZE BATTERIES

 

SIZE IN

RECHARGE TIME

 

AMP HR

IN HOURS

LAWN & GARDEN

20-30

12-18

EQUIPMENT

30-40

18-24

MOTORCYCLE

10-15

6-9

 

15-24

9-21

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents General Battery Safety Schumacher Electric CorporationCAR / Light CCA RES Recharge Trucks CAP TIME-HOURS Personal Precautions and SafetyPreparing to Charge Marine / or MCA AMP HR Deep CycleBattery Charger Controls Reading Ammeter Battery TypesOperating Instructions Charging Battery OUT of the Vehicle Circuit BreakerPositive Grounded Post Operating Instructions Charging Battery in VehicleNegative Grounded Post Troubleshooting Problem Possible SolutionMAINTENANCE/CLEANING Instructions Limited WarrantyPage Seguridad General CON LAS Baterias Largo del cordón pies 100 150 Tamaño AWG del cordónTAMAÑO/VALOR Nominal DE LA Bateria Precauciones Y Seguridad PersonalesPreparativos Para Cargar Controles DEL Cargador DE Baterías Tipos DE Baterias Reading the METER/LECTURA DEL MedidorDisyuntor Poste CON Puesta a Tierra Negativa Poste CON Puesta a Tierra PositivaSolucion DE Problemas Problema Posible Explicacion SolucionInstrucciones Para Mantenimiento Y Limpieza Garantia LimitadaNotas

5216A-PE, 612A-PE, 520A-PE specifications

The Schumacher 520A-PE, 612A-PE, and 5216A-PE are innovative battery chargers designed to meet the demands of today's users who require efficient, reliable, and versatile charging solutions. Each model offers unique features and technology tailored to different needs, making them suitable for various applications from automotive to recreational vehicles.

The Schumacher 520A-PE model is engineered for optimal performance, delivering a powerful 520 Amp peak current. This model is particularly advantageous for users needing a reliable jump start for larger vehicles. It is equipped with advanced microprocessor technology that monitors and adjusts the charging process automatically, ensuring that batteries are charged safely and effectively without overcharging. The unit also features a built-in safety system with reverse polarity protection, ensuring user safety by preventing incorrect connections.

Moving to the Schumacher 612A-PE, this model provides up to 612 Amp peak current, making it ideal for heavy-duty applications. Its robust design is complemented by a user-friendly interface, which includes a digital display that provides real-time charging information. The 612A-PE is equipped with high-efficiency speed charging capabilities, enabling users to get their vehicles back on the road faster. The charger’s versatility allows it to serve various battery types, including AGM and gel, meeting the needs of both traditional and advanced battery technologies.

The Schumacher 5216A-PE offers a balanced combination of power and functionality, reaching a peak current of 216 Amps. It stands out for its lightweight and portable design, making it convenient for everyday users. This model also incorporates a smart charging technology that adjusts the output based on the battery's condition, providing an optimized charge that extends battery life. Its user-friendly interface features LED indicators that display the charging status clearly, allowing users to monitor the process easily.

In summary, the Schumacher 520A-PE, 612A-PE, and 5216A-PE battery chargers exhibit the brand's commitment to innovation and performance. With their advanced features and technologies such as microprocessor control, safety systems, and efficiency-oriented designs, these chargers cater to a wide array of user requirements. Whether for household use or heavy-duty applications, Schumacher's offerings ensure that users can depend on durable, high-performance charging solutions that keep their batteries in peak condition.
Top Page Image Contents