Haier 311209J important safety instructions Hot Melt Dispense Guns

Page 1

Instructions - Parts

Hot Melt

Dispense Guns

311209J

For dispensing non-flammable hot melt thermoplastic sealants and adhesives.

3500 psi (24.1 MPa, 241 bar) Maximum Working Pressure

See page 2 for model information.

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

Bottom feed model

TI7700b

Top feed model	TI7702b

Image 1

Contents Hot Melt Dispense Guns Models ContentsBurn Hazard Fire and Explosion Hazard Connect Heated Hose InstallationConnect Electrical Cable Adapter Hose SizeGround the System Trigger Lock Pressure Relief ProcedureHeatup OperationShutdown DispensingProblem Causes Solutions TroubleshootingInstall New Heater Cartridges, RTD Sensor, or Switch ServiceAdjust Needle Assembly Service Valve Stem and SealInspection Frequency 311209J Models 249514 and 249512, Hot Melt Guns PartsPart No. Description Qty HandleModels 249515 and 249513, Hot Melt Guns Models 249515 and 249513, Hot Melt Guns54‡ 102273 SCREW, 6-32 x 55‡ SCREW, 4-40 x Models 297274 and 297273, Hot Melt Guns Models 297274 and 297273, Hot Melt Guns15G019 SPACER, cover mounting 112699 Description AccessoriesTechnical Data Graco Information Graco Standard Warranty