Haier 311209J important safety instructions 15G019 SPACER, cover mounting 112699

Model 297274

Manual Hot Melt Gun, Bottom Feed, Swirl, with Switch

Model 297273

Manual Hot Melt Gun, Top Feed, Swirl, with Switch

Ref.
No.	Part No. Description		Qty.
1	15G017	HANDLE	1
2	15F983	BODY, gun	1
3	15G006	SPACER, thermal, isolator	1
4	287734	NEEDLE, assy, includes 4a-4j	1
4a	15G531	NEEDLE	1
4b	C27053	SUPPORT, packing	1
4c*	C27060	SEAL, needle	3
4d*	103338	PACKING, o-ring	1
4e	15F993	NUT, packing	1
4f	15F991	SCREW, adjustment	1
4g	C19284	NUT, hex	1
4h	15F997	YOKE, gun	1
4j*	106560	PACKING, o-ring	1
5	15G004	RETAINER, spring	1
6	15G002	ADAPTER, swirl	1
7	118072	HEAD, applicator, swirl	1
8	287736	SWIVEL, assy (inline with stop)	1
9	15G018	COVER, gun handle	1
10	119876	CONDUIT, flex	1
12	116673	BUSHING, strain relief	1
13	116637	CONNECTOR, cable coupler	1
		hood
14	C00020	SPRING	1
15	115860	INSERT, male	1
16	15F989	COVER, gun wires	1
17	C27051	TRIGGER, gun	1
18	15G022	TUBE	1
19	C32368	RING	1
20	119889	COVER, swivel	1
21	C32255	SENSOR, temperature	1
22	119885	CARTRIDGE, heater	2
23	C34009	TRIGGER, lock	1
24	C27035	PIN, trigger	3
25	C20442	RING, snap, external	6
26	15G020	HANGER	1
27	15G121	WASHER, gun	1
28❄	15K546	WIRE, 18AWG, 600v	1
29	115862	CONNECTOR, male, crimp	7
30	C78160	TERMINAL	1
31	100035	SCREW, 8-32 x .31	2
32	103854	SCREW, 6-32 x .25	5
33	120103	SCREW, socket-hd., 8-32 x 2.50	2
34	108483	SCREW, shoulder	1

			Parts
Ref.
No.	Part No. Description		Qty.
35	C20565	WASHER, spring washer	1
36	15G060	BLOCK, terminal	1
37	102975	SCREW, 6-32 x .25	1
39❄	C07535	TUBE, heat shrink	1
40❄	C34137	INSULATOR, fiberglass	1
41	C19286	NUT, 8-32	2
42❄	15K547	WIRE, 22AWG, 600V	1
43❄	C33049	TAPE, adhesive, fiberglass	1
44❄	198422	COVER, protective	1
45❄	198442	STRAP, retaining mix manifold	2
46	100272	WASHER, lock	1
47*	103610	PACKING, o-ring	1
48†	116807	SCREW, mach, pan head, cross	1
49*	617836	SLEEVE, fiberglass braid,	2
		#10 blk
50	15G003	COVER, switch	1
51	C32370	SWITCH	1
52	15G019	SPACER, cover mounting	1
53	112699	TUBE	1
54	102273	SCREW, set, socket	1
55		SCREW, mach, Phillips rnd hd	3
56	117950	NOZZLE, 0.030	1

*Parts included in Seal Kit 253553 (purchase sepa- rately).

† Model 297274 only.

❄Not shown.

311209J 19