Equipment Misuse Hazard

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this manual where applicable.

WARNING

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system com- ponent. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

•Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

•Do not alter or modify equipment. Alterations or modifications may void agency approvals and create safety hazards.

•Make sure all equipment is rated and approved for the environment in which you are using it.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

SKIN INJECTION HAZARD

High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

•Do not point dispensing device at anyone or at any part of the body.

•Do not put your hand over the fluid outlet.

•Do not stop or deflect leaks with your hand, body, glove, or rag.

•Follow the Pressure Relief Procedure when you stop dispensing and before cleaning, checking, or servicing equipment.

•Tighten all fluid connections before operating the equipment.

•Check hoses and couplings daily. Replace worn or damaged parts immediately.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDSs to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

•Always wear chemically impermeable gloves when spraying, dispensing, or cleaning equipment.

309032L

242056, 242058, 242005, 24H399, 242057 specifications

The Graco 24H series, including models 24H400, 24H406, 24H403, 24H402, and 24H404, represents a powerful lineup in the world of airless paint sprayers. These models are designed for contractors and DIY enthusiasts who require top-notch performance and reliability for various painting tasks.

One of the main features of the Graco 24H series is their high-efficiency airless design, which allows for a consistent, smooth finish without the need for thinning paints or stains. These sprayers can handle a variety of materials, from latex paints to heavy coatings, making them incredibly versatile.

The 24H400 model boasts a robust motor that delivers pressure up to 3,600 PSI, providing the strength required to distribute paint evenly across surfaces. The inclusion of Graco’s SmartControl technology ensures a steady spray pattern and pressure control, enhancing the sprayer’s user-friendliness.

Meanwhile, the 24H406 model is equipped with additional features designed for larger jobs. It includes an extended reach and capacity, which allows for efficient coverage of larger areas, reducing the time spent on projects. This model also features a reversible spray tip, making it easy to clear clogs and maintain uninterrupted operation.

The 24H403, on the other hand, emphasizes portability without sacrificing power. With an ergonomic design and lightweight build, this model is perfect for contractors who are frequently on the move, allowing for easy transport from one job site to another.

The 24H402 model is particularly focused on residential projects. It’s engineered to handle detailed work with precision. Its fine finish tip option is ideal for achieving a professional-grade appearance on trim and smaller surfaces.

Lastly, the 24H404 offers advanced technology for spray pattern adjustment, allowing users to switch between various spray settings depending on the project requirements. This model also includes a sturdy stand for improved stability during operation.

Overall, the Graco 24H series combines efficiency, versatility, and innovative technology, making it a reliable choice for both professionals and hobbyists seeking high-quality painting solutions. Each model caters to specific needs and preferences, ensuring that users can find the perfect fit for their projects. With robust construction and advanced features, the Graco 24H series is a commendable investment for achieving a flawless finish.