Install the Rear Panel on the Wall, If Wooden Wall

3-3. Install the Rear Panel on the Wall

Be sure to confirm that the wall is strong enough to sus- pend the unit.

See either Item a) or b) below depending on the wall type.

a) If Wooden Wall

(1)Attach the rear panel to the wall with the 10 screws provided. (Fig. 11)

If you are not able to line up the holes in the rear panel with the beam locations marked on the wall, use toggle bolts to go through the holes on the panel or drill 3/16 inch dia. holes in the panel over the stud locations and then mount the rear panel.

(2)Double check with a ruler or carpenter’s level that the panel is level. This is important to install the unit properly. (Fig. 12)

(3)Make sure the panel is flush against the wall. Any space between the wall and unit will cause noise and vibration.

b) If Block, Brick, Concrete or Similar Type Wall

Make 3/16 inch dia. holes in the wall. Insert rawl plugs for appropriate mounting screws. (Fig. 13)

3-4. Remove the Grille to Install the Indoor Unit

Basically, these models can be installed and wired with-

out removing the grille. If access to any internal part is needed, follow the steps as given below:

How to remove the grille

(1)Set the 2 flaps in the horizontal position.

(2)Unscrew the 3 screws. (Fig. 14a)

(3)Remove the grille.

(a)Hold both corners of the air intake grille, then pull out and up to open. (Fig. 14b)

(b)Use a standard screwdriver to push up the 3 tabs to remove the grille. (Fig. 14b)

(c)Pull the lower part of the grille toward you to remove. (Fig. 14a)

Fig. 11

Fig. 12

1-3/16 inches or more

3/16 inch dia. hole

Rawl plug (Field supply)

Fig. 13

Grille

Air intake grille

Fig. 14a

Air intake grille

Fig. 14b

CL2432, C2432 specifications

The Sanyo C2432 and CL2432 are cutting-edge lithium coin cell batteries renowned for their reliability and versatility in a range of electronic applications. These batteries are designed to provide efficient power solutions for devices requiring compact energy sources, making them ideal for medical devices, watches, calculators, and various portable electronics.

One of the main features of the Sanyo C2432 and CL2432 is their high energy density. This capability ensures that these batteries can deliver a significant amount of energy in a small size, extending the operational time of devices without frequent replacements. Typically, the nominal voltage of these batteries is 3 volts, providing a steady output throughout their lifecycle, which is essential for devices that rely on consistent power levels.

The technologies incorporated in the C2432 and CL2432 models include lithium manganese dioxide chemistry, which enhances their performance and ensures a longer shelf life. These batteries are also designed to perform well under a wide temperature range, ensuring functionality in varying environmental conditions, be it cold or heat. This reliability makes them a preferred choice in critical applications where failure is not an option.

Another key characteristic is their low self-discharge rate, which allows the batteries to maintain stored energy for extended periods. This is particularly advantageous for devices that are used infrequently or that require energy-efficient power sources to maximize their lifespan. With an operational lifespan that can exceed 10 years in certain applications, they perfectly match the needs of devices like memory backup systems and remote controls.

In terms of physical design, both the C2432 and CL2432 feature a standardized coin cell form, which makes them compatible with most devices designed for this battery size. They are also environmentally friendly and can be recycled, aligning with modern sustainability practices.

Overall, the Sanyo C2432 and CL2432 batteries stand out in the market due to their high energy density, advanced lithium technology, long service life, and low self-discharge rates. These features make them an essential component for a variety of electronic devices, solidifying their reputation as a trusted power solution in both consumer and industrial applications.