Installation Site Selection, Indoor Unit

1-6. Additional Materials Required for Installation

1.Refrigeration (armored) tape

2.Insulated staples or clamps for connecting wire (See local codes)

3.Putty

4.Refrigeration lubricant

5.Clamps or saddles to secure refrigerant tubing

2. Installation Site Selection

Indoor unit

Drain hose

Outside drainage

Fig. 1

2-1. Indoor Unit

WARNING

AVOID:

To prevent abnormal heat gen- eration and the possibility of fire, do not place obstacles, enclosures and grilles in front of or surrounding the air condi- tioner in a way that may block air flow.

6 inches	6 inches min. 6 inches
min.	min.
	Front View
	Fig. 2

●direct sunlight.

●nearby heat sources that may affect performance of the unit.

●areas where leakage of flammable gas may be expected.

●places where large amount of oil mist exist.

DO:

	INDOOR	Tubing length (L)
	UNIT
	Elevation	OUTDOOR
	difference (H)	OUTDOOR
	difference (H)	UNIT
		UNIT

Fig. 3a

● select an appropriate position from which every corner

of the room can be uniformly cooled. (High on a wall

is best.)

● select a location that will hold the weight of the unit.

● select a location where tubing and drain hose have

the shortest run to the outside. (Fig. 1)

● allow room for operation and maintenance as well as

unrestricted air flow around the unit. (Fig. 2)

● install the unit within the maximum elevation differ-

ence (H) above or below the outdoor unit and within a

CAUTION

For stable operation of the air conditioner, do not install wall-mounted type indoor units less than 5 ft. from floor level.

Indoor unit

Wall

Minimum height from floor level

5 ft.

total tubing length (L) from the outdoor unit as detailed

in Table 3 and Fig. 3a.

Table 3

Floor level

Fig. 3b

	Max. Allowable Tubing	Limit of Tubing	Limit of Elevation	Required Amount of
Model	Length at Shipment	Length (L)	Difference (H)	Additional Refrigerant
	(ft.)	(ft.)	(ft.)	(oz./ft.)*

C2432, CL2432	25	132	50	0.27

*If total tubing length becomes 25 to 132 ft. (max.), additional refrigerant (R22) charge of 0.27 oz./ft. is required. No additional charge of compressor oil is necessary.

CL2432, C2432 specifications

The Sanyo C2432 and CL2432 are cutting-edge lithium coin cell batteries renowned for their reliability and versatility in a range of electronic applications. These batteries are designed to provide efficient power solutions for devices requiring compact energy sources, making them ideal for medical devices, watches, calculators, and various portable electronics.

One of the main features of the Sanyo C2432 and CL2432 is their high energy density. This capability ensures that these batteries can deliver a significant amount of energy in a small size, extending the operational time of devices without frequent replacements. Typically, the nominal voltage of these batteries is 3 volts, providing a steady output throughout their lifecycle, which is essential for devices that rely on consistent power levels.

The technologies incorporated in the C2432 and CL2432 models include lithium manganese dioxide chemistry, which enhances their performance and ensures a longer shelf life. These batteries are also designed to perform well under a wide temperature range, ensuring functionality in varying environmental conditions, be it cold or heat. This reliability makes them a preferred choice in critical applications where failure is not an option.

Another key characteristic is their low self-discharge rate, which allows the batteries to maintain stored energy for extended periods. This is particularly advantageous for devices that are used infrequently or that require energy-efficient power sources to maximize their lifespan. With an operational lifespan that can exceed 10 years in certain applications, they perfectly match the needs of devices like memory backup systems and remote controls.

In terms of physical design, both the C2432 and CL2432 feature a standardized coin cell form, which makes them compatible with most devices designed for this battery size. They are also environmentally friendly and can be recycled, aligning with modern sustainability practices.

Overall, the Sanyo C2432 and CL2432 batteries stand out in the market due to their high energy density, advanced lithium technology, long service life, and low self-discharge rates. These features make them an essential component for a variety of electronic devices, solidifying their reputation as a trusted power solution in both consumer and industrial applications.