Reversing switch action
This tool has a reversing switch to change the direction of rotation. Move the revers- ing switch lever to the &? position for
clockwise rotation or the position for counterclockwise.
Reversing switch lever 1
CAUTION :
Always check the direction of rotation before operation.
*Use the reversing switch only when the tool comes to a complete stop. Changing the direction of rotation before the tool stops may ruin the tool.
Operation
Fit the screw on the point of the bit and place the point of the screw on the surface
of the workpiece to be fastened. Apply pressure to the tool and start it. Withdraw the tool as soon as the clutch cuts in.
Then release the trigger.
CAUTION :
0 Use the proper bit for the head of the screw that you wish to use.
When fitting the screw onto the point of the bit, be careful not to push in on the screw. If the screw is pushed in, the clutch will engage and the screw will rotate suddenly. This could damage a workpiece or cause an injury.
Do not continue unnecessary clutching operation.
7