1.2Explanation of the pictograms and other information
Warning signs
en
General | Warning: | Warning: |
warning | electricity | caustic |
|
| substances |
Obligation signs
Wear eye | Wear a hard | Wear ear | Wear |
protection | hat | protection | protective |
|
|
| gloves |
Wear
breathing protection
Symbols
Read the | Return waste | Volts | Direct current |
operating | material for |
|
|
instructions | recycling. |
|
|
before use |
|
|
|
Rated speed | Revolutions | Diameter | Saw blade |
under no load | per minute |
|
|
1 These numbers refer to the corresponding illustra- tions. The illustrations can be found on the
In these operating instructions, the designation “the power tool” always refers to the WSC 70ತA36 or WSC 55ತA24 cordless circular saw.
Location of identification data on the power tool The type designation can be found on the type iden- tification plate and the serial number on the side of the motor housing. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department.
Type:
Serial no.:
2. Description
2.1 Use of the product as directed
The power tool is a
The power tool is designed for sawing wood or
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
Modification of the power tool is not permissible.
18