Hilti WSC 55-A24, WSC 70-A36 Switches, Grips, Protective device, Deep discharge protection

The use of saw blades that do not comply with the given specification (e.g. diameter, thickness) or the use of cutting and grinding discs or blades made from high-alloy steel (HSS steel) is not permissible.

Sawing metals is not permissible.

Do not use the power tool to cut tree branches or logs.

Do not use the battery as a power source for other unspecified appliances. To avoid the risk of injury, use only genuine Hilti accessories and insert tools.

Observe the information printed in the operating instructions concerning operation, care and maintenance.

2.2 Switches

Control switch with switch-on interlock

2.3 Grips

Grip and auxiliary grip

2.4 Protective device

Blade guard and pivoting guard

2.5Lubrication Grease lubrication

2.6Deep discharge protection

To extend the life of the battery and the motor, the electronic control system is designed to audibly reduce blade drive speed when excessive pressure is applied, up to the point at which the blade stalls completely when pressure is maintained causing activation of the power cut-out.

CAUTION

So long as the control switch remains depressed, the power tool runs up to speed again when the pressure applied to it is released, just like a mains-powered tool.

2.7 Liತion battery charge status

When a Li-ion battery is used, the charge status can be indicated by gently pressing one of the battery release buttons (press until resistance is felt - do not release the battery). The display on the rear of the battery provides the following information:

LEDs light constantly	LEDs blink	Charge status C
LED 1,2,3,4	-	C ฺ 75 %
LED 1,2,3	-	50 % ู C < 75 %
LED 1,2	-	25 % ู C < 50 %
LED 1	-	10 % ู C < 25 %
-	LED 1	C < 10 %

2.8Items supplied as standard

1 Power tool

1 Saw blade

1 Hexagon socket wrench

1 Operating instructions

1 Hilti toolbox (optional)

1 Cardboard box (optional)

en

19