HP 420 To change profiles, To switch to the Power control panel

Chapter 3 Learning the basics 33

To change profiles

1.Select the radio button of the profile you want to change.

2.Adjust sound, brightness, and contrast sliders to your preference.

3.Tap OK to save the new settings. Tapping the Close button exits this window and abandons all changes.

You can switch to the Volume & Sounds control panel by tapping the Speaker button.

Viewing battery status

The Settings tab displays the remaining battery capacity on a status bar at the bottom of the window. You can also view power status on the Power control panel.

To switch to the Power control panel

1.Tap the Battery button next to the battery status bar.