Hilti WSC 55-A24, WSC 70-A36 operating instructions Manufacturer’s warranty tools

Page 20

CAUTION

Dispose of the batteries in accordance with national regulations or return them to Hilti.

Most of the materials from which Hilti tools or machines are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old tools for recycling. Please ask your Hilti customer service department or Hilti representative for further information.

For EC countries only

Disposal of electric tools together with household waste is not permissible.

In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

en

11. Manufacturer’s warranty - tools

Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti Operating Instructions, and the technical system is maintained. This means that only original Hilti consumables, components and spare parts may be used in the tool.

This warranty provides the free-of-charge repair or replacement of defective parts only over the entire lifespan of the tool. Parts requiring repair or replace- ment as a result of normal wear and tear are not covered by this warranty.

Additional claims are excluded, unless stringent na- tional rules prohibit such exclusion. In particular, Hilti is not obligated for direct, indirect, incidental or consequential damages, losses or expenses in connection with, or by reason of, the use of, or inability to use the tool for any purpose. Implied warranties of merchantability or fitness for a par- ticular purpose are specifically excluded.

For repair or replacement, send the tool or related parts immediately upon discovery of the defect to the address of the local Hilti marketing organization provided.

This constitutes Hilti's entire obligation with regard to warranty and supersedes all prior or contempor- aneous comments and oral or written agreements concerning warranties.

31

Image 20
Contents WSC 70-A36 WSC 55-A24 + +± ±#Ç 00CoverWSC70A36P1.qxd 2006 1023 Seite 00CoverWSC70A36P1.qxd 2006 1023 Seite Z54 Contents Safety notices and their meaningGeneral information Operating controls and partsSymbols DescriptionExplanation of the pictograms and other information Obligation signsSwitches Liತion battery charge statusGrips Protective deviceAccessories Technical dataPrAA Safety rulesBattery 36/2.4 NiCd 36/3.3 Li-ion 24/2.0 NiCd Personal safety Power tool use and careService Never direct the power tool toward persons Battery use and care Before useWork area Ensure that the workplace is well lit Personal protective equipmentOperation Adjusting the riving knife Adjusting the cutting depthAdjusting the cutting angle Removing the saw bladeFitting / adjusting the parallel guide Using the saw on the guide rail Longitudinal cuts atUsing the saw with a dust and chip removal system Using the saw without a dust and chip removal systemCare and maintenance Care of the power toolCare of the NiCd battery Care of the Li-ion batteryDisposal TroubleshootingFault Possible cause Remedy Manufacturer’s warranty tools EC declaration of conformity Hilti CorporationHilti Corporation