Cleaning, Carrying Case, Keyed Blade Clamp Kit

MAINTENANCE

ACCESSORIES

FIVE YEAR TOOL

LIMITED WARRANTY

WARNING!

To reduce the risk of injury, always unplug your tool before performing any maintenance. Never disassemble the tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tools

Keep your tool in good repair by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mounting, broken parts and any other condition that may af- fect its safe operation. If abnormal noise or vibration occurs, turn the tool off imme- diately and have the problem corrected before further use. Do not use a damaged tool. Tag damaged tools “DO NOT USE” until repaired (see “Repairs”).

Under normal conditions, relubrication is not necessary until the motor brushes need to be replaced. After six months to one year, depending on use, return your tool to the nearest MILWAUKEE service facility for the following:

Cleaning

Clean dust and debris from vents. Keep the tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your tool since certain clean- ing agents and solvents are harmful to plas- tics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household deter- gents containing ammonia. Never use flam- mable or combustible solvents around tools.

WARNING!

To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow a liquid to flow inside the tool.

Repairs

If your tool is damaged, return the entire tool to the nearest service center.

WARNING!

To reduce the risk of injury, always unplug the tool before

attaching or removing accessories. Use only specifically

recommended accessories. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a catalog, contact your local dis- tributor or a service center.

Quik-Lok®Cord Sets

10' Quik-Lok®Cord Cat. No. 48-76-5010 25' Quik-Lok®Cord Cat. No. 48-76-5025

Carrying Case

Cat. No. 48-55-2055

Orbital Pipe Clamp System

Cat. No. 49-22-1016

Keyed Blade Clamp Kit

Cat. No. 49-22-5016

See Pages 46 & 47 for a listing of Super Sawzall® Blades.

Every MILWAUKEE tool is tested before leaving the factory and is warranted to be free from defects in material and work- manship. MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which examination proves to be defective in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of purchase.

THEREPAIRANDREPLACEMENTREMEDIES DESCRIBEDHEREINAREEXCLUSIVE.INNO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS FOR

•Lubrication

•Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)

•Electrical inspection (switch, cord, armature, etc.)

•Testing to assure proper mechanical and electrical operation

PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.

6523-21, 6536-21 specifications

Milwaukee Tool has established itself as a leader in the power tool industry, consistently pushing the boundaries of performance and innovation. Among its wide array of products, the Milwaukee 6536-21 and 6523-21 models stand out as powerful and reliable options for professionals and DIY enthusiasts alike.

The Milwaukee 6536-21 is a cordless band saw that boasts incredible versatility and cutting performance. It is equipped with a brushless motor that provides superior power and efficiency, allowing users to achieve a more extended run time and overall longer tool life. This model features a 5-inch cutting capacity, making it suitable for a variety of applications including cutting copper, PVC, and other materials up to 5 inches in diameter.

One of the significant highlights of the 6536-21 is its built-in LED light that illuminates the cutting area, enhancing visibility in tight or dimly lit spaces. Additionally, the saw is designed for optimal portability, as it is lightweight and compact, enabling users to maneuver easily when tackling projects overhead or in confined spaces. The adjustable speed dial allows for customized cutting speeds, enhancing precision and control for various materials.

On the other hand, the Milwaukee 6523-21 is a powerful cordless recriprocating saw that offers unmatched cutting capabilities for a wide range of materials. The saw is equipped with a brushless motor as well, which delivers significant power and runtime. With a stroke length of 1-1/8 inches and a variable speed trigger, users can achieve fast and efficient cuts, whether they are working with wood, metal, or other materials.

Both models utilize Milwaukee's Redlink Plus intelligence system. This technology enables communication between the tool and the battery, ensuring optimized performance and preventing overheating or over-discharging. The 6523-21 also features an easy-to-use blade clamp that allows for quick blade changes without the need for additional tools.

In summary, the Milwaukee 6536-21 and 6523-21 are exemplary tools that embody the company's commitment to innovation, durability, and user-centric design. With their powerful motors, enhanced mobility, and intelligent features, they are ideal for professionals who demand the best performance from their tools in any working environment. Whether you are seeking to cut large pipes or tackle construction tasks, these models can probably cater to your needs effectively.