Installing or removing the battery cartridge 1222
*Always switch off the tool before insertion or removal of the battery cartridge.
*To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge.
*To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it until it is locked with a little click.
I | . | I |
*Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.
Installing the set plate
Always install the set plate when using bat- tery cartridges 1200, 1201, 1201A, 1202 or 1202A. Install the set plate on the tool with the screw and nut provided as shown in the figure.
Installing or removing the battery cartridge 1200,1201,1201A. 1202 and 1202A. *Always switch off the tool before insertion or removal of the battery cartridge.
*To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
*To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Snap the set plate back into place. Be sure to close the set plate fully before using the tool.
*Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.
11