Makita 5093DZ instruction manual Additional Safety Rules For Charger & Battery Cartridge

Page 10

ADDITIONAL SAFETY RULES

FOR CHARGER & BATTERY CARTRIDGE

1.Do not charge Battery Cartridge when temperature is BELOW 10°C (5OoF) or ABOVE 4OoC (104OF).

2.Do not attempt t o use a step-up transformer, an engine generator or DC power receptacle.

3.Do not allow anything t o cover or clog the charger vents.

4.Always cover the battery terminals with the battery cover when the battery cartridge is not used.

5.A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

(1)Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge t o water or rain.

6.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).

7.Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.

SAVE THESE INSTRUCTIONS.

Image 10
Contents RPM General Safety Rules Work AreaService Tool Use and CareSpecific Safety Rules Causes and Operator Prevention of Kickback Kickback Dont TRY to Hold Short Places by Hand Hens MinImportant Safety Instructions For Charger Battery Cartridge 9101,9102,9120,9122,9133,1200,1201,1202,1210,1211,1220,1222Additional Safety Rules For Charger & Battery Cartridge Installing or removing the battery cartridge Installing the set plateCharging Removing or installingthe saw blade Hex wrench storageAdjusting the depth of cut Bevel cuttingSighting Switch actionOperation Tips for maintainingmaximum battery life Trickle charge MaintenancechargeGuide rule Recycling the Battery Accessories 85 mm 3-3/8 Makita Corporation of America