Removing or installingthe saw blade
CAUTION:
Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the blade.
To remove the blade, press the shaft lock so that the blade cannot revolve and use the hex wrench to loosen the bolt counter- clockwise. Then remove the bolt, outer flange and blade.
To install the blade, follow the removal pro-
cedure in reverseBolt \
BE SURE TO TIGHTEN THE BOLT
SECURELY.
CAUTlON:
*Be sure the blade is installed with teeth pointing up at the front of the tool. *Use only the Makita hex wrench to install or remove the blade.
Hex wrench storage
When not in use, the hex wrench can be conveniently stored.
Hex wrench
I \
13