Makita 5093DZ instruction manual Hens, Min

Page 8

SYMBOLS

Listed below are symbols commonly used on tools.

...	....volts
.................................	amperes
	..... hens
.................................	kilograms
.............................	hours
.................................	minutes
.................................	seconds
..........................	. alternating current
	. direct current
G	no load speed
	.... alternating or direct current
	Class II Construction
A	splash-proof construction
A A	watertight construction
.../min	revolutions or reciprocation per minute
G=l	...... number of blows

8

Image 8

Contents RPM General Safety Rules Work AreaService Tool Use and CareSpecific Safety Rules Causes and Operator Prevention of Kickback Kickback Dont TRY to Hold Short Places by Hand Hens MinImportant Safety Instructions For Charger Battery Cartridge 9101,9102,9120,9122,9133,1200,1201,1202,1210,1211,1220,1222Additional Safety Rules For Charger & Battery Cartridge Installing or removing the battery cartridge Installing the set plateCharging Removing or installingthe saw blade Hex wrench storageAdjusting the depth of cut Bevel cuttingOperation Switch actionSighting Guide rule Trickle charge MaintenancechargeTips for maintainingmaximum battery life Recycling the Battery Accessories 85 mm 3-3/8 Makita Corporation of America