Sanyo KHS0971, KHS1271 Special Remarks, ‘‘DRY’’ Operation, Heating Operation, Clicking Sound

Page 17

Special Remarks

‘‘DRY’’ ( ) Operation

How it works? • Once the room temperature reaches the level that was set, the unit’s operation frequency is changed automatically.

• During DRY operation, the fan speed automatically runs at lower speed for providing a comfortable breeze.

• ‘‘DRY’’ operation is not possible if the indoor temperature is 59 °F or less.

Heating ( ) Operation

Heating performance

• Because this air conditioner heats a room by drawing in the heat of the

 

outside air (heat pump system), the heating efficiency will fall off when the

 

outdoor temperature is very low. If sufficient heat cannot be obtained with this

 

air conditioner, use another heating appliance together with it.

Defrosting

• When the outdoor temperature is low, frost or ice may form on the heat

 

exchanger coil, reducing heating performance. When this happens, a

 

microcomputer defrosting system operates. At the same time, the fan on the

 

indoor unit stops and the OPERATION lamp lights up red and orange

 

alternately until defrosting is completed. Heating operation restarts after

 

several minutes. (This interval will vary slightly depending upon the outdoor

 

temperature and the way in which frost forms.)

Cold draft prevention

• For several minutes after the start of heating operation, the indoor fan runs at

 

lower speed until the indoor heat exchanger coil has warmed up sufficiently.

 

However, the fan may remain stopped when the room temperature is low. This

 

is because the COLD DRAFT PREVENTION SYSTEM is operating.

Power failure during operation

Clicking Sound

•In the event of power failure, the unit will stop. When the power is resumed, the unit will restart automatically within five minutes by the remote control unit.

Clicking sound is heard from the air conditioner

Remote Control Unit

•In heating or cooling operation, any plastic parts may expand or shrink due to a sudden temperature change. In this event, a clicking sound may occur. This is normal, and the sound will soon disappear.

•The remote control unit sends the setting condition to the air conditioner regularly at five minute intervals.

OI-802-17EG

17

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents This air conditioner uses the new refrigerant R410A Mode D’EMPLOIFeatures Product Information ContentsAlert Symbols Electrical Requirements Installation LocationSafety Instructions Outdoor Unit Names of PartsIndoor Unit Quiet lamp Unit Display and Operation ButtonRemote Control Unit Display On Time Remote Control UnitHour OFF Timer Heat AutoDRY CoolTemperature Display Selector Using the Remote Control UnitHow to Install Batteries Button Time Display Selector buttonUsing the Remote Control Unit Automatic Operation Operation with the Remote Control UnitStep Press the ON/OFF operation buttonManual Operation Operation with the Remote Control UnitFan Only Adjusting the Fan SpeedNight Setback Mode is used for saving energy Night Setback ModeCooling and DRY Mode ION Mode Quiet ModeHigh Power Mode Special Remarks Remote Control Unit‘‘DRY’’ Operation Heating OperationOperation Indication Setting the TimerHow to set the present time Repeat timer Setting the TimerTo cancel a timer program Press the Cancel button 1030 pm 710 am 1100 am Present timeSetting procedure Using the 1-Hour OFF TimerCancellation procedure Operation together with the Daily ON/OFF Repeat TimerFAN Sweep Heat Adjusting the Airflow DirectionCool DRY Sweep When the air conditioner is not running Operation without the Remote Control UnitCare and Cleaning Care and Cleaning Negative ion generator metal electrodes inside plastic case Trouble Possible Cause Remedy TroubleshootingOperating Range Caractéristiques Informations sur le produit Symboles d’avertissementTable des matières Conseils de sécurité Emplacement d’installationInstructions relatives à l’alimentation Élément Intérieur Nom des piècesÉlément Extérieur RemarqueTimer Quiet TimerAfficheur de l’appareil et bouton de fonctionnement OperationTélécommande Affichage Télécommande On TIME/OFF Time Télécommande suiteUtilisation de la télécommande Climatiseur élément intérieur Récepteur Télécommande Utilisation de la télécommande suitePour retirer la télécommande, tirer vers l’avant TrouÉtape Fonctionnement avec télécommandeFonctionnement automatique Étape Remarque Fonctionnement avec télécommande suiteFonctionnement manuel Ventilateur uniquement Réglage de la vitesse du ventilateurVitesse automatique Du ventilateurCe mode permet de réduire la consommation d’énergie Mode économie nocturneMode d’ionisation ION Mode de silencieux QuietMode de fonctionnement Haute puissance Remarques spéciales TélécommandeFonctionnement séchage ChauffageRéglage à l’heure Réglage du temporisateurActuelle Réglage du moment de mise à l’arrêt OFFRéglage du moment de mise en marche on Réglage du temporisateur suite1030 p.m 710 a.m 1100 a.m ProgrammationEmploi du temporisateur 1 heure HR. TimerConseils pour économiser l’énergie Daily ON/OFF RepeatSweep Cool DRY FAN Heat Réglage du flux d’airEntretien et nettoyage Fonctionnement sans télécommandeElément Intérieur Si le climatiseur ne fonctionne pasFront Entretien et nettoyage suiteNettoyage du générateur d’ions négatifs Panne Cause possible Remède Guide de dépannagePlage de températures de fonctionnement Sanyo Fisher Company

KHS0971, KHS1271 specifications

The Sanyo KHS0971 and KHS1271 are two innovative models in the ever-evolving world of air conditioning and heating solutions. Known for their engineering excellence, these units offer high-performance climate control, catering to modern consumer needs for efficiency, comfort, and convenience.

Starting with the KHS0971, it boasts a sleek design, allowing it to blend seamlessly into various interior styles. Its standout feature is the advanced inverter technology. This system intelligently adjusts the compressor speed based on the set temperature, ensuring optimal energy consumption. The result is not only a reduction in energy bills but also a lower carbon footprint, making this model an environmentally friendly choice.

The KHS0971 operates quietly, making it ideal for residential settings. This is a significant advantage for bedrooms and living rooms where peace and quiet are essential. Its powerful cooling and heating capabilities can cover larger areas, ensuring a comfortable environment no matter the season. Furthermore, its customizable settings enable users to create tailored temperature profiles according to individual preferences.

On the other hand, the KHS1271 takes climate control a step further with additional features and enhanced performance. Among its key characteristics is a higher cooling and heating capacity, making it suited for bigger spaces or environments with more demanding temperature requirements. Like its sibling, the KHS1271 is engineered with inverter technology, providing consistent temperature maintenance and energy efficiency.

Another remarkable feature of the KHS1271 is its advanced air filtration system. This technology effectively removes dust, allergens, and other pollutants from the air, improving indoor air quality and ensuring a healthier living space. This makes the unit particularly appealing to families with children or individuals with respiratory issues.

Both models are equipped with user-friendly remote controls, allowing for easy adjustments from across the room. Additionally, they offer programmable timers, enabling users to set cooling or heating schedules according to their daily routines. This convenience feature helps enhance energy savings further.

In summary, the Sanyo KHS0971 and KHS1271 represent significant advancements in air conditioning technology. With their energy-efficient inverter systems, quiet operation, and effective air purification capabilities, these models provide exceptional comfort and convenience, making them excellent choices for any modern home. Their combination of performance, efficiency, and usability ensures they stand out in a competitive market.
Top Page Image Contents