Sanyo Complete Guide to Ion Inverter Care for KHS1271 and KHS0971
Page 24

 

 

Care and Cleaning (continued)

Air Clean Filter

The air clean filter removes dust and dirt from the air, and reduces odors and smoke from

 

tobacco.

 

This air clean filter cannot remove harmful gases or vapors nor ventilate air in the

 

room. You must open doors or windows frequently when you use gas or oil heating

 

appliances. Otherwise there is a risk of suffocation in extreme cases.

How to install the air

The air clean filter needs to be installed behind the air intake grille.

clean filter

1.

Remove the air intake grille.

 

2.

Install the air clean filter in the position

 

 

shown in the figure.

 

3.

Remount the air intake grille.

How to clean the air clean filter

NOTE

Cleaning the main unit and remote control unit

Removing and remounting the air intake grille

CAUTION

Washing the grille with water

Air clean filter

•In general, the filter should be sucked to remove dust in low fan speed of a vacuum cleaner once every three months.

•If there is heavily grime on the filter, soak the filter in lukewarm water with neutral detergent diluted 1:500 for 1 to 2 minutes then wash it.

•Rinse the filter in clean water, then let it dry on the towel in room temperature.

•Do not bend nor give excessive force onto the air clean filter.

•If the filter surface is heavily blocked with dirt or damaged, replace it with new one. Purchase a replacement filter at your local dealer. (model STK-FDXB)

•Wipe clean using a soft, dry cloth.

•To remove stubborn dirt, moisten a cloth in warm water no hotter than 104 °F, wring thoroughly, and then wipe.

•The air intake grille can be removed in order to wash it with water.

Refer to “How to remove the anti-mold filter” and “How to replace the anti-mold filter” on page 23.

When using a footstool or the like, be careful not to let it tip over.

•Clean the grille gently using a soft sponge, or the like. Then wipe away any remaining moisture.

•Neutral detergent may be used to remove stubborn dirt. Then rinse thoroughly with water and wipe away any remaining moisture.

Cleaning the negative ion generator

Follow the steps below when the generator has become dirty.

For safety, be sure to turn the air conditioner off and also to disconnect the power before cleaning.

Remove the dust on the negative ion generator.

•Use a toothbrush, etc. to dust off the end.

•Use a cotton swab, etc., to clean around the generator inside the plastic case, taking care not to touch the electrodes.

Negative ion generator (metal electrodes inside plastic case)

NOTE

•During use, the negative ion generator and other metal parts may become discolored: this is normal and not indicative of malfunctioning.

•If the dirt on and around the negative ion generator is left to build up, a puffing or sputtering sound will eventually be heard. In this case, clean the generator immediately.

•Do not apply excessive force while performing maintenance.

24

OI-802-24-EG

 

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Mode D’EMPLOI This air conditioner uses the new refrigerant R410AFeatures Contents Alert SymbolsProduct Information Installation Location Safety InstructionsElectrical Requirements Names of Parts Indoor UnitOutdoor Unit Unit Display and Operation Button Quiet lampRemote Control Unit Display Remote Control Unit Hour OFF TimerOn Time Auto HeatDRY CoolUsing the Remote Control Unit Temperature Display SelectorHow to Install Batteries Button Time Display Selector buttonUsing the Remote Control Unit Operation with the Remote Control Unit Automatic OperationStep Press the ON/OFF operation buttonOperation with the Remote Control Unit Manual OperationAdjusting the Fan Speed Fan OnlyNight Setback Mode Cooling and DRY ModeNight Setback Mode is used for saving energy Quiet Mode High Power ModeION Mode Remote Control Unit Special Remarks‘‘DRY’’ Operation Heating OperationSetting the Timer How to set the present timeOperation Indication Setting the Timer Repeat timerTo cancel a timer program Press the Cancel button 1030 pm 710 am 1100 am Present timeUsing the 1-Hour OFF Timer Setting procedureCancellation procedure Operation together with the Daily ON/OFF Repeat TimerAdjusting the Airflow Direction Cool DRY SweepFAN Sweep Heat Operation without the Remote Control Unit Care and CleaningWhen the air conditioner is not running Care and Cleaning Negative ion generator metal electrodes inside plastic case Troubleshooting Operating RangeTrouble Possible Cause Remedy Caractéristiques Symboles d’avertissement Table des matièresInformations sur le produit Emplacement d’installation Instructions relatives à l’alimentationConseils de sécurité Nom des pièces Élément IntérieurÉlément Extérieur RemarqueQuiet Timer TimerAfficheur de l’appareil et bouton de fonctionnement OperationTélécommande Affichage Télécommande Télécommande suite On TIME/OFF TimeUtilisation de la télécommande Utilisation de la télécommande suite Climatiseur élément intérieur Récepteur TélécommandePour retirer la télécommande, tirer vers l’avant TrouFonctionnement avec télécommande Fonctionnement automatiqueÉtape Fonctionnement avec télécommande suite Fonctionnement manuelÉtape Remarque Réglage de la vitesse du ventilateur Ventilateur uniquementVitesse automatique Du ventilateurMode économie nocturne Ce mode permet de réduire la consommation d’énergieMode de silencieux Quiet Mode de fonctionnement Haute puissanceMode d’ionisation ION Télécommande Remarques spécialesFonctionnement séchage ChauffageRéglage du temporisateur Réglage à l’heureActuelle Réglage du moment de mise à l’arrêt OFFRéglage du temporisateur suite Réglage du moment de mise en marche on1030 p.m 710 a.m 1100 a.m ProgrammationHR. Timer Emploi du temporisateur 1 heureConseils pour économiser l’énergie Daily ON/OFF RepeatRéglage du flux d’air Sweep Cool DRY FAN HeatFonctionnement sans télécommande Entretien et nettoyageElément Intérieur Si le climatiseur ne fonctionne pasEntretien et nettoyage suite FrontNettoyage du générateur d’ions négatifs Guide de dépannage Plage de températures de fonctionnementPanne Cause possible Remède Sanyo Fisher Company

KHS0971, KHS1271 specifications

The Sanyo KHS0971 and KHS1271 are two innovative models in the ever-evolving world of air conditioning and heating solutions. Known for their engineering excellence, these units offer high-performance climate control, catering to modern consumer needs for efficiency, comfort, and convenience.

Starting with the KHS0971, it boasts a sleek design, allowing it to blend seamlessly into various interior styles. Its standout feature is the advanced inverter technology. This system intelligently adjusts the compressor speed based on the set temperature, ensuring optimal energy consumption. The result is not only a reduction in energy bills but also a lower carbon footprint, making this model an environmentally friendly choice.

The KHS0971 operates quietly, making it ideal for residential settings. This is a significant advantage for bedrooms and living rooms where peace and quiet are essential. Its powerful cooling and heating capabilities can cover larger areas, ensuring a comfortable environment no matter the season. Furthermore, its customizable settings enable users to create tailored temperature profiles according to individual preferences.

On the other hand, the KHS1271 takes climate control a step further with additional features and enhanced performance. Among its key characteristics is a higher cooling and heating capacity, making it suited for bigger spaces or environments with more demanding temperature requirements. Like its sibling, the KHS1271 is engineered with inverter technology, providing consistent temperature maintenance and energy efficiency.

Another remarkable feature of the KHS1271 is its advanced air filtration system. This technology effectively removes dust, allergens, and other pollutants from the air, improving indoor air quality and ensuring a healthier living space. This makes the unit particularly appealing to families with children or individuals with respiratory issues.

Both models are equipped with user-friendly remote controls, allowing for easy adjustments from across the room. Additionally, they offer programmable timers, enabling users to set cooling or heating schedules according to their daily routines. This convenience feature helps enhance energy savings further.

In summary, the Sanyo KHS0971 and KHS1271 represent significant advancements in air conditioning technology. With their energy-efficient inverter systems, quiet operation, and effective air purification capabilities, these models provide exceptional comfort and convenience, making them excellent choices for any modern home. Their combination of performance, efficiency, and usability ensures they stand out in a competitive market.
Top Page Image Contents