Sanyo KHS0971, KHS1271 Adjusting the Airflow Direction, Cool DRY Sweep, FAN Sweep Heat

Page 21

Adjusting the Airflow Direction

1. Horizontal

CAUTION

The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right.

When the humidity is high, the vertical vanes should be in the front position during the cooling or dehumidifying operation. If the vertical vanes are positioned all of the way to the right or left, condensation may begin to form around the air vent and drip down.

2.Vertical The vertical airflow can be adjusted by moving the flap with the remote control unit. Do not move the flap with your hands. Confirm that the remote control unit has been turned on. Use the FLAP button to set either the sweep function or one of the six airflow direction settings.

COOL

DRY

SWEEP

A. Sweep function

The flap starts moving up and down to deliver air over the sweep range.

C. Auto flap function

The flap is set to the recommended position.

FAN

SWEEP

HEAT

B. Setting the airflow manually

Referring to the above illustration, use the FLAP button to set the airflow direction within the range used during the heating, cooling, or dehumidifying operation.

NOTE

CAUTION

•The flap automatically closes when the unit is off.

•During the heating operation, the fan speed will be very low and the flap will be in the horizontal position (position ) until the air being blown out of the unit begins to warm. Once the air warms up, the flap position and fan speed change to the settings specified with the remote control.

•Use the FLAP button on the remote control to adjust the position of the flap. If you move the flap by hand, the flap position according to the remote control and the actual flap position may no longer match. If this should happen, shut off the unit, wait for the flap to close, and then turn on the unit again; the flap position will now be normal again.

•Do not have the flap pointed down during cooling operation. Condensation may begin to form around the air vent and drip down.

OI-802-21EG

21

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents This air conditioner uses the new refrigerant R410A Mode D’EMPLOIFeatures Contents Alert SymbolsProduct Information Installation Location Safety InstructionsElectrical Requirements Names of Parts Indoor UnitOutdoor Unit Quiet lamp Unit Display and Operation ButtonRemote Control Unit Display Remote Control Unit Hour OFF TimerOn Time Heat AutoDRY CoolTemperature Display Selector Using the Remote Control UnitHow to Install Batteries Button Time Display Selector buttonUsing the Remote Control Unit Automatic Operation Operation with the Remote Control UnitStep Press the ON/OFF operation buttonManual Operation Operation with the Remote Control UnitFan Only Adjusting the Fan SpeedNight Setback Mode Cooling and DRY ModeNight Setback Mode is used for saving energy Quiet Mode High Power ModeION Mode Special Remarks Remote Control Unit‘‘DRY’’ Operation Heating OperationSetting the Timer How to set the present timeOperation Indication Repeat timer Setting the TimerTo cancel a timer program Press the Cancel button 1030 pm 710 am 1100 am Present timeSetting procedure Using the 1-Hour OFF TimerCancellation procedure Operation together with the Daily ON/OFF Repeat TimerAdjusting the Airflow Direction Cool DRY SweepFAN Sweep Heat Operation without the Remote Control Unit Care and CleaningWhen the air conditioner is not running Care and Cleaning Negative ion generator metal electrodes inside plastic case Troubleshooting Operating RangeTrouble Possible Cause Remedy Caractéristiques Symboles d’avertissement Table des matièresInformations sur le produit Emplacement d’installation Instructions relatives à l’alimentationConseils de sécurité Élément Intérieur Nom des piècesÉlément Extérieur RemarqueTimer Quiet TimerAfficheur de l’appareil et bouton de fonctionnement OperationTélécommande Affichage Télécommande On TIME/OFF Time Télécommande suiteUtilisation de la télécommande Climatiseur élément intérieur Récepteur Télécommande Utilisation de la télécommande suitePour retirer la télécommande, tirer vers l’avant TrouFonctionnement avec télécommande Fonctionnement automatiqueÉtape Fonctionnement avec télécommande suite Fonctionnement manuelÉtape Remarque Ventilateur uniquement Réglage de la vitesse du ventilateurVitesse automatique Du ventilateurCe mode permet de réduire la consommation d’énergie Mode économie nocturneMode de silencieux Quiet Mode de fonctionnement Haute puissanceMode d’ionisation ION Remarques spéciales TélécommandeFonctionnement séchage ChauffageRéglage à l’heure Réglage du temporisateurActuelle Réglage du moment de mise à l’arrêt OFFRéglage du moment de mise en marche on Réglage du temporisateur suite1030 p.m 710 a.m 1100 a.m ProgrammationEmploi du temporisateur 1 heure HR. TimerConseils pour économiser l’énergie Daily ON/OFF RepeatSweep Cool DRY FAN Heat Réglage du flux d’airEntretien et nettoyage Fonctionnement sans télécommandeElément Intérieur Si le climatiseur ne fonctionne pasFront Entretien et nettoyage suiteNettoyage du générateur d’ions négatifs Guide de dépannage Plage de températures de fonctionnementPanne Cause possible Remède Sanyo Fisher Company

KHS0971, KHS1271 specifications

The Sanyo KHS0971 and KHS1271 are two innovative models in the ever-evolving world of air conditioning and heating solutions. Known for their engineering excellence, these units offer high-performance climate control, catering to modern consumer needs for efficiency, comfort, and convenience.

Starting with the KHS0971, it boasts a sleek design, allowing it to blend seamlessly into various interior styles. Its standout feature is the advanced inverter technology. This system intelligently adjusts the compressor speed based on the set temperature, ensuring optimal energy consumption. The result is not only a reduction in energy bills but also a lower carbon footprint, making this model an environmentally friendly choice.

The KHS0971 operates quietly, making it ideal for residential settings. This is a significant advantage for bedrooms and living rooms where peace and quiet are essential. Its powerful cooling and heating capabilities can cover larger areas, ensuring a comfortable environment no matter the season. Furthermore, its customizable settings enable users to create tailored temperature profiles according to individual preferences.

On the other hand, the KHS1271 takes climate control a step further with additional features and enhanced performance. Among its key characteristics is a higher cooling and heating capacity, making it suited for bigger spaces or environments with more demanding temperature requirements. Like its sibling, the KHS1271 is engineered with inverter technology, providing consistent temperature maintenance and energy efficiency.

Another remarkable feature of the KHS1271 is its advanced air filtration system. This technology effectively removes dust, allergens, and other pollutants from the air, improving indoor air quality and ensuring a healthier living space. This makes the unit particularly appealing to families with children or individuals with respiratory issues.

Both models are equipped with user-friendly remote controls, allowing for easy adjustments from across the room. Additionally, they offer programmable timers, enabling users to set cooling or heating schedules according to their daily routines. This convenience feature helps enhance energy savings further.

In summary, the Sanyo KHS0971 and KHS1271 represent significant advancements in air conditioning technology. With their energy-efficient inverter systems, quiet operation, and effective air purification capabilities, these models provide exceptional comfort and convenience, making them excellent choices for any modern home. Their combination of performance, efficiency, and usability ensures they stand out in a competitive market.
Top Page Image Contents