Fig. 8A
Fig. 8B
TO PREVENT ACCIDENTAL ELECTRICAL SHOCK THE SAW MUST BE HELD AS SHOWN IN FIG. 8A OR 8B, AND MUST HAVE THE RUBBER FRONT HOUSING COVER PROPERLY INSTALLED AND NOT DAMAGED.
DO NOT USE THE TOOL UNLESS THE ROTATING HANDLE IS LOCKED IN POSITION. IF THE HANDLE WILL NOT LOCK THE TOOL MUST BE RETURNED FOR REPAIR.
A
Fig. 8C
TO START AND STOP SAW
1.Make sure power circuit voltage is the same as shown on the specification plate on the saw. Connect saw to power circuit.
2.Hold saw firmly. Squeeze trigger switch (A) Fig. 9, to start motor. Release trigger to stop motor.
A
Fig. 9
12