PYLE Audio 747 Operation, Selecting the Blade, Blade Clamp Features, Installing the Blade Model

OPERATION

SELECTING THE BLADE

For best performance, longer blade life, and smoother cut, select the proper blade for the job. A complete line of accessories is available from your Porter-Cable•Delta Supplier, Porter-Cable•Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier.

When cutting metal always select a blade which will allow at least three teeth to be engaged in the thickness of material.

BLADE CLAMP FEATURES

1.Model 745 is supplied with a standard hex key blade clamp.

2.Models 746 and 747 are supplied with a keyless Quik-Change™blade clamp.

INSTALLING THE BLADE MODEL 745

DISCONNECT TOOL FROM POWER SOURCE.

1.Use hex wrench (supplied with Model 745), to loosen blade clamp screw (A) Fig. 1, by turning counterclockwise three to four turns.

2.Insert the blade into the blade clamp until it bottoms, (A) Fig. 2. When the blade is properly positioned: the hole in the blade shank will align with the hole (B) Fig. 3, in the backside of blade clamp.

3.Firmly tighten clamp screw.

4.To remove blade, loosen blade clamp screw three to four turns and pull

blade from clamp.

NEVER TOUCH BLADE IMMEDIATELY AFTER USE, AS IT MAY BE EXTREMELY HOT.

A

Fig. 1

A

Fig. 2

9