Fastening Stand to Supporting Surface

If there is any tendency for the scroll saw to move during operation, the scroll saw stand must be fastened to the floor.

OPERATING CONTROLS AND ADJUSTMENTS

Fig. 16

ON-OFF POWER SWITCH

The on-off switch (A) Fig. 16, is located on the top of the arm, as shown. To turn the saw “ON” push down on the “ON” portion of the switch and to turn the saw “OFF” push down on the “OFF” por- tion of the switch.

VARIABLE SPEED CONTROL

Your scroll saw can be operated at speeds of 300 to 2000 cutting strokes per minute by rotating control knob (B) Fig. 16. With the control knob (B) rotated all the way toward the front of the machine the speed will be 300 cutting strokes per minute and with the control knob (B) rotated all the way to the rear, the speed will be 2000 cutting strokes per minute. A series of numbers are pro- vided on the control knob, as shown, and a witness line (C) is provided on the arm to be used for reference.

LOCKING ON-OFF SWITCH

IN “OFF” POSITION

IMPORTANT: We suggest that when the scroll saw is not in use, the on-off switch be locked in the “OFF” position using a padlock (A), as shown in Fig. 17. Available as an accessory from Delta is the 50-325 padlock, shown at (A).

Fig. 17