Kawasaki RH1-090048 Maintenance and Cleaning, Accessories, Tool Current Rating, Specifications

Page 37

MAINTENANCE AND CLEANING

Always remove the battery pack before attempting cleaning or maintenance.

This Circular Saw is lubricated before it leaves the factory. This lubrication should last for the life of the tool. No further lubrication is required.

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.

Always clean the battery pack using only a dry cloth. Do not use liquids.

Always unplug the charger before cleaning it.

Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth.

Inspect all mounting screws regularly. Tighten any loose screws. Failure to keep the mounting screws tight could result in serious injuries.

Never open the Cordless Circular Saw case, battery pack or charger. Do not attempt to repair the Cordless Circular Saw, battery pack or charger yourself. Opening any of these parts will void your warranty.

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experi- ence a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table on next page).

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

TOOL CURRENT RATING

 

 

CONDUCTOR SIZE IN A.W.G

 

AMPERE

10FT.

 

25FT.

50FT.

100FT.

3-6

18

 

18

18

18

6-8

18

 

18

18

16

8-10

18

 

18

18

14

10-12

16

 

16

14

14

12-16

14

 

12

12

-

16-20

12

 

12

12

-

 

 

 

 

 

 

 

SPECIFICATIONS

 

 

 

 

 

 

 

 

SPECIFICATIONS

 

 

 

 

Voltage

19.2V

 

 

 

 

 

 

 

 

 

 

Switch

On/Off Switch

 

 

Charger Input

120V

 

60Hz

 

 

Charging Time

Approx. 1 hour

 

 

No Load Speed (RPM)

3130/min.

 

 

Blade Diameter

￿ 140mm (5-1/2")

 

 

Battery Type

Ni-Cad

 

 

 

 

PROTECTING THE ENVIRONMENT

BATTERIES

Alltrade batteries can be recharged many times. At the end of their useful life, recycle batteries with due care for our environment.

Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS

Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723.

Cordless Drills/Screwdrivers

Angle Grinders

Impact Wrenches

Reciprocating Saws

Sanders

Routers

Jigsaws

Rotary Tools

Circular Saws

Corded and Cordless Multi-Purpose Tools

 

Wide Range of Accessories and more

19

Image 37
Contents 19.2V 2-SPEED BATTERY-OPERATED Drill General Safety Rules for ALL Battery Operated Tools Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsElectrical Safety Important SafeguardsPersonal Safety Save These Instructions for Future ReferenceSpecific Safety Rules AND/OR Symbols ServiceSafety Rules for Cordless Drill / Drivers Tool USE and CareSymbol Name Explanation SymbolsAccessories Functional DescriptionREMOVING/ATTACHING Battery Pack BatteryRemove Battery Pack Attach Battery PackAssembly Charging Battery PackInstalling Drill BIT Into Keyless Chuck Important Information for Recharging HOT BatteriesTorque Settings Variable Speed Trigger SwitchForward / Reverse and Trigger Lock Lever HIGH/LOW Speed Gear ShiftingDrilling Metal Maintenance and CleaningDrilling Masonry Drilling WoodSpecifications AccessoriesConductor Size in A.W.G Protecting the EnvironmentCommercial or Rental Purpose Year Limited WarrantyWarranty Disclaimers 19.2V BATTERY-OPERATED Worklight Safety Rules for Worklight Symbols Safety Rules for Worklight Battery Tool USE and CareComponent Model Number Controls and ComponentsRemoving / Attaching Battery Pack Operating the on / OFF Switch Charge Battery PackAdjusting the Worklight Beam Operating the WorklightTool Current Rating Recommended Sizes of Extension Cords 120 Volt AC 60 HZ ToolsCorded and Cordless Multi-Purpose Tools Exclusions 19.2V Battery Pack Congratulations Symbols Which Extend Beyond the Description on the Face Hereof Year Limited Home USE WarrantyWarranty Disclaimers 19.2V BATTERY-OPERATED Circular SAW General Safety Rules for ALL Battery Operated Tools Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsElectrical Safety Important SafeguardsSave These Instructions for Future Reference Work AreaService Personal SafetySpecific Safety Rules AND/OR Symbols Tool USE and CareCauses and Prevention of Kickback Safety Rules for Circular SAWSymbol Name Explanation SymbolsFunctional Description Component Model NumberBattery Control FeaturesBlade Safety Lock Button Bevel Leveling KnobCharging Battery Pack Removing / Attaching Battery PackCharger Adjusting Depth and Angle AssemblyAttaching / Removing Blade Trigger Switch Operating the Trigger SwitchOperating the Circular SAW General CuttingAccessories Maintenance and CleaningSpecifications Tool Current RatingCommercial or Rental Purpose Year Limited WarrantyWarranty Disclaimers 19.2V BATTERY-OPERATED Reciprocating SAW General Safety RULES-FOR ALL Battery Operated Tools Important Safeguards Safety Rules for Cordless Reciprocating Saws Name Explanation Controls and Components Functional Description BatteryCordless Reciprocating Saw This Tool is Controlled by a Trigger Switch Variable Speed Trigger SwitchTo Attach Blade To Remove BladeMetal Cutting Plunge CuttingVoltage 19.2V Length of Stroke 22mm 7/8 Switch Other Consumer DO-IT-YOURSELF DIY Tools Limitation Of Liability