Ruby Tech PM0426-13 owner manual Diagnostics Menu, Video Test

COPYRIGHT © 2005 MERIT INDUSTRIES, INC.

Diagnostics Menu

		FIGURE 15 - DIAGNOSTICS MENU
Video Test	Touch the screen to cycle through a series of video test screens.
	Tests the SETUP and CALIBRATE buttons, all coin channels, the
	coin meter, and the coin lockout feature (if applicable). A green
I/O Test	light next to the appropriate button will register each time that item
	is tested, and the number next to the item should increment by one
	with each test. The screen also displays which DIP switches are
	on or off.
Touchscreen	Follow the on-screen instructions to calibrate the touchscreen.
Calibration
Touchscreen Test	Allows you to check the touchscreen calibration accuracy. The
	crosshairs should follow your finger exactly when you move it
	across the screen.
View System Log	Displays a log of all operations performed by the game since the
	log was last cleared. This information is helpful for customer
	service in troubleshooting your game.
	Checks the hard drive for missing or corrupted files. With STOP
	ON ERROR? set to YES, a message indicating which file is
	corrupted will be shown whenever the game encounters an error.
Checksum Test	With STOP ON ERROR? set to NO, a list of corrupted files will be
	displayed when the test is complete. If errors are detected, the
	software on the drive may need to be reloaded. If this does not
	solve the problem, the drive may require replacement. The test
	could take up to 30 minutes.
	Gives details about the following:		•	hard drive manufacturer
	•	processor type and speed
				and capacity
	•	motherboard manufacturer
			•	modem part
System Info	•	amount of memory
				identification number
	•	Ethernet card manufacturer	•
				fan speed
	•	sound chip type
			•	status
	•	video chip type
	•	touchscreen manufacturer
Verifying Databases	Only use on the advice of Merit Technical Service. An Update
	from Server must be performed prior to verifying databases.
Joystick Calibration	Follow the on-screen instructions to calibrate the joystick.
(ION only)
Joystick Test	Allows you to check the joystick calibration accuracy. The
(ION only)	crosshairs should follow the movement of the joystick.

PM0426-13 MEGATOUCH EVO ION OWNER’S MANUAL 18