Switch Unit | Page 1 of 2 |
[Table of Contents] [Previous Page] [Next Page]
CAUTIONS TO BE HEEDED WHEN USING THE TEST MODE:
In the case where multiple units are linked for communication play, exiting from the test mode causes the unit to perform the network check automatically. During this time, all of the linked units will not allow the game to be played in normal status. Therefore, be sure not to enter the test mode if any one of the units is in play. On the other hand, if even one unit is in the test mode, make sure that other machines are not in play.
FIG. 8.1 SWITCH UNIT
Open the coin chute door, and the switch unit shown will appear. The functioning of each SW is as follows:
TEST SWITCH (TEST)
SERVICE SWITCH (SERVICE)
SOUND VOLUME (FRONT VOL,
SUPERWOOFER)
SOUND VOLUME (REAR VOL)
:For the handling of the test button, refer to the following pages.
:Gives credits without registering on the coin meter.
:Adjusts the volume of the control panel's speakers and Superwoofer under the seat.
:Adjusts the volume of the 2 rear speakers behind the seat and the control panel's tweeter.
The control panel switches are also used in the test mode. For each functioning, refer to the following page and onward.
http://www.sauservice.com/manuals/Daytona%20Folder/DDhtml/DD19.html7/12/2005