Handling Precautions | Page 1 of 1 |
[Table of Contents][Previous Page] [Next Page]
1. HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely.
zBe sure to turn the power off before working on the machine.
zTo insert or pull out the plug quickly is dangerous.
zIt is necessary to make sure that the power cord or the grounding wire is not exposed on the road, etc. in a manner so as to be dangerous. Make sure that grounding connections are made safely at the position where so specified.
zDo not use any fuse that does not meet specified rating.
zMake complete connections for the IC board and other connectors. Insufficient insertion is very dangerous.
zThe operating (ambient) temperature range is from 5°C to 40°C.
zWhen cleaning the CRT surfaces, use a soft, dry cloth. Do not apply chemicals such as thinner, benzene, etc.
Also, for the IC board circuit inspections, only the logic tester is allowed. The use of a tester is not permitted, so be careful in this regard.
After confirming that there are no irregularities, turn the power ON.
CONCERNING THE PROJECTION DISPLAY:
A PROJECTION DISPLAY is used for this machine. The PROJECTION DISPLAY's screen is susceptible to damage and therefore, when cleaning it, pay careful attention. For details, refer to Section 13.
CONCERNING COMMUNICATION PLAY:
Herein stated is an independent use of the machine. This game, when linked with other units, allows multiple persons to enjoy "communication play" simultaneously. For communication play, refer to Communication Manual.
http://www.sauservice.com/manuals/Daytona%20Folder/DDhtml/DD01.html7/12/2005