Input Test | Page 1 of 1 |
[Table of Contents] [Previous Page] [Next Page]
When INPUT TEST is selected, the monitor will show the following, allowing you to watch the status of each switch and the value of each V.R. of the CONTROL PANEL.
On this screen, periodically check the status of each switch & V.R.
zBy pressing each switch, if the display on the
zTo check CHUTE 1 & CHUTE 2 coin switches, open the COIN CHUTE DOOR and insert a coin
(s) from the coin entry.
zTo return back to the MENU mode, simultaneously press VR1 & VR2, or press the TEST SW.
FIG. 8.6 INPUT TEST
An appropriate value of each V.R. is as follows:
HANDLE: | Under 2DH | Over D3H | |
| left | (Centering position) | right |
ACCEL: | Under 30H | Over COH | |
BRAKE: | Under 30H | Over D2H | |
| (the pedal released) |
| (the pedal stepped) |
http://www.sauservice.com/manuals/Daytona%20Folder/DDhtml/DD26.html7/12/2005