Greasing & Replacement of Rubber Stoppers | Page 1 of 1 |
[Table of Contents] [Previous Page] [Next Page]
11-3 GREASING
Apply grease to the following points once every 3 months as a standard. Also, note that RUBBER RING 70 is not of an
Make sure that grease and any other type of oil do not adhere to it.
FIG. 11.4
11-4 REPLACEMENT OF RUBBER STOPPERS
Once every 6 months as a standard, check to see if any damage is caused to the rubber stoppers. If they are damaged, replace them with the spare parts in the procedure shown in the FIG. below.
FIG. 11.5
http://www.sauservice.com/manuals/Daytona%20Folder/DDhtml/DD38.html7/12/2005