Parker Products OPS1200 user manual Hpos, Move the horizontal cursor position, VPOS, Open

HPOS	(OPS1200 Display and Keyboard Only)
Move the horizontal cursor position
Format:	HPOS {value}
Group:	Character I/O
Units:	none
See also:	VPOS, OPEN

This command moves the horizontal position of the cursor on the LCD screen after evaluating the expression. The value is a number from 0 to 39, in increments of 1. A “0” will place the cursor at the extreme LEFT of the 40 character screen.

Note that this command will only work if the OPS: device has been opened using the “OPEN” command.

The following example sets the cursor position to character space 2 from the left:

Usage example:

HPOS 1

16 OPS1200 User’s Manual