OPS1200 INTERCONNECT WIRING
Digital Inputs / Outputs (P3)
There is one 37 pin D-sub provided on the OPS1200 for digital I/O interface. The 37 pin D-sub is used for both the 16 Digital Inputs and 16 Digital Outputs. Refer to Figure 1 for connector location.
Note: P3 is a 37-pin female D-sub.
P3
Usage | Pin | Usage | Pin |
| | | |
INP-00 | 1 | INP-01 | 20 |
INP-02 | 2 | INP-03 | 21 |
INP-04 | 3 | INP-05 | 22 |
INP-06 | 4 | INP-07 | 23 |
INP-08 | 5 | INP-09 | 24 |
INP-10 | 6 | INP-11 | 25 |
INP-12 | 7 | INP-13 | 26 |
INP-14 | 8 | INP-15 | 27 |
N/C | 9 | OUT-32 | 28 |
OUT-33 | 10 | OUT-34 | 29 |
OUT-35 | 11 | OUT-36 | 30 |
OUT-37 | 12 | OUT-38 | 31 |
OUT-39 | 13 | OUT-40 | 32 |
OUT-41 | 14 | OUT-42 | 33 |
OUT-43 | 15 | OUT-44 | 34 |
OUT-45 | 16 | OUT-46 | 35 |
OUT-47 | 17 | N/C | 36 |
N/C | 18 | N/C | 37 |
N/C | 19 | | |
Table 3.3 OPS1200 Digital I/O Connector
Chapter 3, OPS1200 Hardware Interconnection | 25 |
