Fluke Models 110, 111 MIN MAX AVG Recording Mode Display Hold, Backlight Model 112 Only

Models 110, 111 & 112

Users Manual

MIN MAX AVG Recording Mode		Display HOLD		W
The MIN MAX AVG recording mode captures the minimum and				Warning
maxi	input values, and calculates a running average of all		To avoid electric shock, when Display HOLD is
readings. When a new high or low is detected, the Meter beeps.
			activated, be aware that the display will not change
Put the Meter in the desired measurement function and range.
			when you apply a different voltage.
⇒ Press MIN MAX to enter MIN MAX AVG mode.		In the Display HOLD mode, the Meter freezes t e display.
um and MAX are displayed and the highest reading		⇒	Press HOLD to activate Display HOLD. (		h	is displayed.)
detected since entering MIN MAX AVG is displayed.
		⇒ To exit and return to normal operation, press HOLD or turn the
⇒ Press MIN MAX to step t rough the low (MIN), average
			rotary switch.

(AVG), and present readings.

⇒To pause MIN MAX AVG recording without erasing stored values, press HOLD. his displayed.

⇒To resume MIN MAX AVG recording, press HOLD again.

⇒To exit and erase stored readings, press MIN MAX for at least one second or turn the rotary switch.

Backlight (Model 112 Only)

Press Sto toggle the backlight on and off. The backlight automatically turns off after 2 minutes.

To disable the automatic 2-minute backlight timeout, hold down the Sbutton while turning the Meter on.

4